- Kenmore Elite Refrigerator Evaporator Fan Motor 2225625-KE
Showing posts with label best refrigerator brand. Show all posts
Showing posts with label best refrigerator brand. Show all posts
Kenmore Elite Refrigerator Evaporator Fan Motor 2225625-KE
Whirlpool W10315283RP Maxima Door Reversal Kit
- Universal for all colors
- For use with Maytag Maxima dryers
- Option of opening dryer door from the right.
- Convenient when stacking washer and dryer
Ah, but when they are stacked, that arrangement is a pain. Well, unlike refrigerators, Maytag made this hinge a little complicated to switch. This "kit" is required.
This "kit" is a single piece of plastic trim that fits inside the door, between the outer and inner trim piece. Yes, it's an expensive piece of plastic and seems all wrong to have to buy that, but that's the design.
The trim piece comes with step by step instructions in English and French. Two tools are required, a #2 Philips head screw driver and a T25 Torx screw driver. While waiting for this part to ship, it's a good idea to get the T25 Torx screw driver they are easy to find now. Any length will work fine they recommend an 8 inch version, but any size will do. I used a small rechargeable driver with a Torx bit and a cordless drill with the Philips bit for disassembly.
There are only a few minor tricks to the switch. It took me about 15 minutes to do the job, start to finish. The first scary part was removing the 4 Torx screws that hold the door hinge there is a hooked tab that holds up the door once the screws are removed (no need to have an assistant hold the door). After that it's really straight forward removing the Philips head screws. Pay attention to removing only Philips head screws (the instructions said 17, I only had 14 on my door). There are some smaller Torx screws that are not removed. To remove the inner door trim, there is a sort of tab arrangement at the top and bottom, a little persuasion with my hand released one of the tabs, then the panel separated easily. All the rest is really simple. The trim piece from this "kit" replaces the trim piece already installed on the door.
Now my wife is super happy, both doors swing the same direction and it is much easier to transfer laundry from the washer to the dryer.
Buy Whirlpool W10315283RP Maxima Door Reversal Kit Now
This kit solved my problem which was that I wanted my washer and dryer's set up the way my hook ups were, dryer on the left, washer on the right. Now my doors open outward which means you can open both and just transfer from one to the other without using a basket and closing a door.Read Best Reviews of Whirlpool W10315283RP Maxima Door Reversal Kit Here
I consider myself good at following written directions, but halfway through the process of installing this I felt lost. A few minutes later, it all worked out. I don't know why they couldn't have designed the part to flip over or, if that was too difficult, why they didn't just include the 50 cents of plastic with the $1000 appliance.
Want Whirlpool W10315283RP Maxima Door Reversal Kit Discount?
This piece worked very well and was not too difficult to install.It took a little time but was fairly simple.It is a lot to pay for a piece of plastic, but is required to reverse the door on this dryer.Reversing it was such a great thing as my washer and dryer are stacked.I no longer bump my head or shoulders while doing the laundry.Worth getting.
Swift Green Repl. for Samsung DA29-00003G
Bought a two-pack a year ago.The appeal for me is they have a 'greener' manufacturing process, assuming of course the description is on the up and up.To get the best filtration/taste, it _is_ important to ensure that the full amount of initial water run-through is done, otherwise you may notice some odd taste.
Frigidaire 240351601 Door Bin for Refrigerator
- Works with the following model: Frigidaire 30-2761-23-07
- Works with the following model: Frigidaire 30-2759-00-10
- Works with the following model: Frigidaire 30-2759-23-10
- Works with the following model: Frigidaire 30-2761-00-07
- Genuine replacement part
Save 34% Off
GE WR30X10093 Refrigerator Icemaker Kit
- Genuine GE factory part
- Includes power cords
- Includes end-mounted fill cup
Buy GE WR30X10093 Refrigerator Icemaker Kit Now
The icemaker installed easily and started making ice within a few hours.The ice has all the characteristics of good ice. It's cold, it's hard and it cools my drinks!
Read Best Reviews of GE WR30X10093 Refrigerator Icemaker Kit Here
I ordered the icemaker replacement because the plastic ice cube guard/deflector (plastic part with plastic teeth) had broken on my old icemaker, and this $1.00 part cannot be purchased separately.The replacement came, and the instructions said "DO NOT use the plastic ice cube guard in this new icemaker, replace with the guard from your old icemaker before installing".WHAT?Needless to say, I have used the guard that the new icemaker came with, and it has worked fine so far.Want GE WR30X10093 Refrigerator Icemaker Kit Discount?
The print for my refrigerator showed the part #WR30X0327 as the icemaker I needed. Apparently it's obsolete and this #WR30X10093 was supposed to be the direct replacement. The adapter cord made the complete cord assembly way too long so had to do some maneuvering to get all the cord placed in the back so it could be mounted. Then the basket would not slide back in as this model hangs to low.Then I get on here and find I can't return it. Great system!!
Save 48% Off
One thing I discovered is this part is listed under at least one other model number depending on where you look for it (in my case, a GE part lookup site, where this part number was in the URL but a different one was displayed on-page).That said it seems to be a pretty much universal icemaker for GE refrigerators, and in my case the Amazon price was well below what the refrigerator repair company quoted, and when accounting for the labor cost they would have charged, I saved upwards of $250 this way.The only part of the installation that was confounding was that for my type of refrigerator, the instructions state to remove the plastic bar that runs across the tray and replace it with the one from the old (broken) icemaker. Problem was, that old one didn't quite fit this one right...it was too big, causing it to buckle slightly. I had to cut down the edge of the inner-most tooth to get a clean fit. No big deal, but a slight over-site by the manufacturer in assuming that the strip from the old icemaker would have the exact same dimensions. It's not a huge issue as this is not a moving part...it simply needs to not block the rotating plastic pins in the tray. I'm guessing that most people don't even bother anyway, and just leave the default strip in there.
Other than this minor adjustment, it was a snap. It fit in my freezer right where the old one went perfectly. It came with a new water tube, but I didn't need it. It also came with the wrong water funnel (where the water falls into the device), but it also had the correct mount for me to place the one from my old icemaker in the correct position, so again, no problems.
All in all, a sort of one-size-fits all replacement that lives up to its billing 99% of the time, and the remaining 1% is easy enough to work around.
And as the heading says, DO NOT throw out your old icemaker. You may need to salvage a couple of rudimentary parts from it to make this one fully compatible with your fridge...in fact, the instructions and design of this unit count on it.
EDIT: I just noticed that a lot of the rows of ice that came out of this icemaker were frozen together. This is typically a result of the tray water level being too high, but I could find no adjustment screw/dial for this. Turns out that it is under the plastic cover of the icemaker (there's just one screw to remove, hidden under a screw cover). Once off I found a screw with a "+/-" by it, which adjusts the water level. All is well now, but sure wish this had been in the instructions.
Water Sentinel WSS-2 Refrigerator Replacement Filter for Samsung DA29-00020A, DA29-00020B 2 Pack
- Delivers clean, clear water that looks and tastes great
- Will remove or reduce Chlorine, Tastes and Odors that may be present in your drinking water
- Designed to provide up to six months of life or 300 gallons
- Does not remove minerals which may be beneficial to health
- Made proudly in the USA!
In the past I have always purchased the brand name Samsung water filters. 2 years ago I moved to Tucson after living in Denver for the past 20 years. The water in Denver is delicious right out of the faucet. Here in Tucson, not so much! I've noticed since living here that the ice cubes from the fridge did not taste good and naturally I felt that it made my iced beverages taste not so good as a result. So this time when I replaced the filter I decided to try a different filter. What a difference! The ice cubes taste much better than before and the price was less than the name brand filter.This is a great, cheaper alternative to the Samsung water filter.It arrived quickly and took a couple of seconds to install.Great price and the drinking water never tasted better you have a customer for life. Ez to install may my day and all most half the price of the OEM