Vinotemp 5.12 Cu. Ft. Outdoor Refrigerator
- Internal digital control panel and blue LED lighting
- Front vented exhaust system for built-in or freestanding installation
- External security lock
- Capacity: 5.12 cubic feet
- Temperature Range: 34-43F
Buy Vinotemp 5.12 Cu. Ft. Outdoor Refrigerator Now
This is a great outdoor fridge for the BarBQ area. It's very competitively priced when compared to the other outdoor rated fridges. The interior is not plastic like the lower end units. And the shelves are glass, which makes for easy cleanup. The only negative is that it has no door handle.I would recommend this unit to all my friends.
Whirlpool 2321799 Defrost Bimetal for Refrigerator
- Works with the following models: Whirlpool 7GS2FHAXTA01, Whirlpool 7GS2FHAXTA02
- Works with the following model: Whirlpool 7GS5FHAXTA02
- Works with the following model: Whirlpool 7GS2SHEXPQ04
- Works with the following model: Whirlpool 7GS2SHEXPL0
- Genuine Whirlpool Replacement Part
Recently the refrigerator compartment wasn't cooling... spoiled milk was the first clue. This was in spite of the fact that the freezer compartment was fine.
I knew that if the compressor was bad it probably wouldn't be worth repairing this old fridge BUT it probably was OK since the freezer was working. Given the age of the refrigerator I was reluctant to call out a repairman when the meter is at $75-100 when they first show up. So I Googled "Whirlpool refrigerator not cooling" to see if I could get any hint as to whether or not it was liable to be a big problem.
MUCH to my surprise I found a lot of really useful information including several very helpful UTube tutorials. These videos provided trouble-shooting tips and detailed disassembly instructions.... once I opened up the freezer compartment (not at all difficult) it was clear from the hidden ice buildup that the defrost cycle wasn't working and that the ice was blocking cold air from the refrigerator compartment. Several of these videos pointed to the automatic defrost system as the likely culprit and specifically to this defrost thermostat. One even showed a test procedure to verify whether the defrost thermostat was faulty (involves a multi-meter and a glass of ice water, but a AA battery and a flashlight bulb would have worked). Sure enough it looked bad (and failed the test) so I went to the local supply houses to find one. They had generics in stock but those lack the clip on feature. The delay for the clip-on part was 4 four days and the cost was $35.... I could have gotten it just as fast and much cheaper through Amazon. The only "skill" required was stripping the wires and applying wire nuts and electricians' tape (see UTube for detailed how-to).
While I was in there I noticed the fan motor was wobbly and somewhat sticky and thus seemed likely to fail soon. This fan was $65 from my local suppliers so I ordered this guyWhirlpool Part Number 2197381: Evaporator Fan Motor from Amazon for about half that. It was easy to install with my newly-found expertise at removing the freezer parts and fit perfectly... probably a 15-minute chore to replace and it works without wobbling and is very smooth turning. Everything good except my worrying... why worry? The vendor delivered the part to UPS within 24 hours of my order but the UPS tracking system said it was going to take 16 DAYS to get here.... from CA to WA!! I kept checking and the UPSs system kept reporting 16 days. It actually showed up in 5 days (three working days) which is normal UPS Ground from California, so it was all about faulty UPS reporting, not any actual service problem, but if you were waiting for it to repair our main refrigerator, it could cause some stress.
Buy Whirlpool 2321799 Defrost Bimetal for Refrigerator Now
This solves the "freezer cold, fridge warm" problem most of the time. It's a cheap part and a pain to get to so why couldn't whirlpool make it better. After the hairdryer method of manually defrosting (keep towels nearby), my old one seems to be working but who knows for how long.Read Best Reviews of Whirlpool 2321799 Defrost Bimetal for Refrigerator Here
As a replacement part, Whirlpool has done nothing to make this part more installable.Be prepared for a difficult install.
Want Whirlpool 2321799 Defrost Bimetal for Refrigerator Discount?
A bear to install in a side-by-side, but the product works.Replaced a working unit as part of a troubleshooting measure, but did not "screw up" normal operation.Just make sure you seal your wire-nut connections!
LG OEM 5989JA1005D ICE MAKER ASSEMBLY KIT
- New OEM Original Part
- LSC26905TT, LRSC26925SW, LRSC26925TT, LRSC26923SW, LRSC26923TT, LRSC26915TT, LRSC26912SW, LRSC26912TT, LRSC26940SW, LRSC26940SB, LRSC26940TT, LRSC26940ST, LRSC26941SB, LRSC26941ST, LSC27926ST, LRSC26941SW, LSC26905SW, LSC26905SB, LRSC26915SW
Buy LG OEM 5989JA1005D ICE MAKER ASSEMBLY KIT Now
Our original tray was bent & causing the water to leak out and freeze all over the place. We called a repairman and he wanted $89 just to come out and said the part would be $160. So I found this and thought, worst case I can return it. My husband replaced it, only 2 screws and we have not had a single problem, it works perfectly!
Read Best Reviews of LG OEM 5989JA1005D ICE MAKER ASSEMBLY KIT Here
Been dealing with a spilling, freezing, iceberg problem for years, this was the fix. Also, someone else said two screws, not true, just take out the screw on the left, pull the entire assembly towards you, there are two screws with offsets that do not need to be removed at all. Then unplug, reverse procedure.3 minutes tops.Want LG OEM 5989JA1005D ICE MAKER ASSEMBLY KIT Discount?
I had problems with my LG Icemaker, and the pricing here on Amazon is very favorable for the replacement unit.I would suggest, however, that before buying this new unit, press the "TEST" button on the bottom right side of the unit.My icemaker just stopped cycling.No water spilling, or no water, or warped tray.It just refused to resume cycling after I removed and replaced the bucket to clear an ice jam.I was about to buy a new part when I took the unit out make sure I could replace it.I noticed a TEST button, reconnected the electrical connector and pressed that button, and it immediately cycled.I don't know whether that button reset the controls or if something was jammed and it forced it to cycle.The unit has been working for several days.You can press that button without even taking the unit out; just take the bucket out and look underneath on the right side.And make sure the ON-OFF button is switched ON!Item was exactly what I needed to start making ice again. Installation took around five minutes. The product arrived in a timely fashion.
Supco Replacement for UKF8001 Refrigerator Filter, 3-Pack
Buy Supco Replacement for UKF8001 Refrigerator Filter, 3-Pack Now
Best price, good quality filters, perfect fit and arrived very quickly!! I liked the fact I could get a 3 pack, also.Read Best Reviews of Supco Replacement for UKF8001 Refrigerator Filter, 3-Pack Here
Thanks you for such an inexpensive, quality product! I will order these filters each time they need replacing! Fabulous product!Want Supco Replacement for UKF8001 Refrigerator Filter, 3-Pack Discount?
I bought these instead of the OEM to save some money.The water just does not taste the same as the OEM Maytag brand.Nice product, fits nice, but I would spend the extra money and get the OEM Maytag filters instead.Cuisinart DCC-1200 Brew Central 12-Cup Programmable Coffeemaker
This coffee tastes smooooooth!I suspect the charcoal water filter is the reason for that.I also like the "shower head" design of the water spout.The water actually runs up a track onto the underside of the lid and is sprinkled over the ground coffee like a rain shower.
It's an attractive unit but it also looks like a serious coffee maker.This unit is no toy.It looks and feels solid. The carafe has a good solid feel and balance. The plastic parts (like the plastic carafe lid and handle) feel like good heavyweight plastic and are well molded. It's not the lightweight crappy plastic that cracks and discolors easily in the cheap coffee makers.
I like the 5 beeps when the coffee is ready.Now I can leave the kitchen and go clean or whatever and I don't have to keep running back to see if I can get a cup yet.I can hear the beeps.But if I really can't wait and want a cup in mid-brew, I can just remove the pot and pour a cup you've got a full 30 seconds to reinsert the pot, before you risk an overflowing filter.
I like the permanent gold-tone filter too.I always thought paper filters were a pain. They'd fold over sometimes and there'd be grounds in my coffee. But you can use paper filters in this machine if you want to. I just prefer the convenience of the gold-tone filter (top rack machine washable too).
It has an indicator light for cleaning -it says it's "self-cleaning" but really it's just a light telling you when you need to pour in a pot of water/vinegar and run it through to decalcify the unit.(I never thought to do that with my other units.Probably another reason my coffee wasn't as good as I wanted it to be.)
The low-medium-high setting on the hot plate is pretty nice too.And the auto-shutoff feature is great.I don't have to worry about forgetting to turn the machine off.
The instruction booklet is very good and very thorough. Comes with a parts reordering form too.
What don't I like about this machine?It requires maintenance in that you have to change the charcoal filters. But actually I don't mind since I think they are the reason the coffee tastes so smooth, and they are very easy to change and not expensive
Also, the area in the top of the machine where you pour in the water is narrow but again this is just a minor inconvenience.Just have to pour a little carefully.
So really it's almost all positives with a couple of very minor negatives.I highly recommend this coffee maker.
(2008 HOLIDAY TEAM)When my Braun FlavorSelect coffee maker unexpectedly stopped working, I had to scramble to find a new machine. I wanted another Braun, but unfortunately, they seem to have stopped making a 12 cup coffee maker. So I had to begin an intense search for a machine that had the features I wanted combined with good value. I finally found it with this Cuisinart model.
The advantages? For one, it makes excellent and HOT coffee. The carafe is solidly constructed and fits securely in square body so there's no chance of someone accidentally knocking it loose. Because the lid fits tightly, the pour is precisely narrow and smooth, with no side leaks even when the pot is full. The basket fits inside the housing instead of swinging free like so many models which prevents a misalignment between the water and the filter; the conical (Krups/Braun style) basket accepts both paper filters and gold-tone, although I learned the hard way that not all gold filters fit. The timer is very easy to program, as is the clock. The carafe warmer can be set at low, medium, or high for the temperature that's right for you. I found the "high" setting too hot since I drink my coffee black (I like my coffee hot but not scalding!), but those who add a lot of milk might appreciate it. The brewing is quick and efficient, with the process taking about a minute a cup, maybe less. The retro/stainless look complements most modern kitchen décors. There's a 1-4 cup setting to make sure such small amounts stay hot, and you can select how long the warmer remains on. The pot beeps five times when brewing is complete and just before the warming plate shuts off. Parts are top rack dishwasher safe. It comes with a water filter system designed to improve the taste of the brew.
But the Cuisinart does have disadvantages. The water reservoir is located on the right side, in the back, which makes it a little challenging for lefties like me to dump the final bit of water inside even though the carafe pours very accurately. Although I haven't yet missed the opening, I do struggle briefly with those last few drops unless I use my right hand. The housing is fairly tall, so if your counter space is only under the cabinets, you may not be able to lift the top in its entirety. (This is when the small rear reservoir becomes a major issue as you have to have room to completely lift the rather large top toward the back.) Clearance required: 7.5" wide by 8.5" deep of counter space with no overhead obstruction to pull out for filling OR 21.5" of overhead space to fully lift top. Without the top open, the coffee maker measures 7.5"w x 8.5"d x 14.25"h.
If you have the space for this coffee maker, you'll love it. I can't attest to how long it will last, but, as it comes with a three year warranty, I'm hoping for a good run.
Buy Cuisinart DCC-1200 Brew Central 12-Cup Programmable Coffeemaker Now
Two weeks ago, I needed a new coffee maker.The Krups Aroma Control maker is in all the stores and catalogs, so I bought one in the local mall BEFORE reading the Amazon reviews.BIG MISTAKE.Lesson learned read the reviews many negative comments.I used it for 3 days, and readily understood the description (...) of "eye candy" (looks nice, but seems like cheap plastic) and weak coffee (what they describe as a feature allowing the coffee to steep is really a euphemism for a poorly designed system that is guaranteed to give you a weak cup of coffee).One redeeming feature the carafe is very nice.Within 2 days of having the Krups, i was on Amazon looking for a replacement coffee maker (a good cup of coffee is critical in the morning!).I went out on the risk curve and ordered the new Cuisinart no reviews yet.The Cuisinart has a more classic brewing system (water goes through grinds via gravity), yields a delicious cup of HOT coffee, has a variable temperature hot place, and looks and feels solid.We happen to have stainless steel appliances (refrigerator, freezer, stove), and it matches beautifully.Best news excellent coffee!.I would highly recommend the Cuisinart.
Read Best Reviews of Cuisinart DCC-1200 Brew Central 12-Cup Programmable Coffeemaker Here
Folks,this is one excellent coffee maker.I read the comments here and decided to get it even though some had complained of spillage when lifting the lid and also the coffee not being hot enough.Well I can tell you that when I lift the lid on mine, the water rolls to the back and then drips back into the machine on a nifty little lip attached to the back of the machine.It appears that Cuisinart has engineered a solution for the complaints of spilled water that some reviewers mention.Also, the coffee coming out of the carafe of my machine has steam drifting off of it, so it is plenty hot, another complaint that seems to have been remedied.There were also a couple of complaints about finger prints on the stainless and the small LED clock being hard to read, but let's be for real, all brushed stainless appliances will fingerprint and this is a very stylish coffee maker, not a kitchen clock(that's what your microwave is for! (wink)).Actually I think the Cuisinart guys intended the clock for autoprogramming functions and made it LED to match the stainless on the machine.And if you don't like the water filter, you don't have to use it.It is a nicety and can be readily found if you search the net for "dcc1200 water filter".Enough defending complaints though.This machine makes superb coffee.It has the best carafe I have ever used(it will not spill a drop and it has a built-in plastic rim to keep you from busting it on the sink).It comes with a gold metal filter.Buy it and you will like it.And if for some strange reason you don't, then take it back.All jabs aside, this is an outstanding machine in form as well as function, and the people at Cuisinart obviously care what their customers think of their products.That means alot to me. How about you???
Want Cuisinart DCC-1200 Brew Central 12-Cup Programmable Coffeemaker Discount?
I recently decided that it was time to buy a new coffeemaker and wanted the BEST! I did my research thoroughly, online and by word-of-mouth, and decided on Cuisinart's DCC-1200 12-Cup Brew Central Coffeemaker. This terrific gadget arrived a week ago and I am thrilled with it.
I love my coffee and usually make time to have at least one, if not two, 12 oz. mugs of freshly brewed java before I leave the house in the AM. Although this is a 12 cup coffeemaker, the settings are geared for a 5 oz. cup. So, for those of you who think a 12 cup machine is too much, this factor should be considered. Coffee is 98% water and if the quality of water used is not good, your final result won't be either. Cuisinart's DCC-1200 has a charcoal water filter that removes chlorine, calcium, bad tastes and odors. The self-cleaning feature is terrific and a warning light will flash to notify when calcium buildup is interfering with the machine's functioning mechanism. Programming for delayed brew time is a snap with the LCD digital clock. One of the features I like best is the heater plate control knob. I like my coffee steaming hot and this feature assures that I can control the temperature of the nonstick heating plate. The machine also looks great on my kitchen counter.
I had thought about buying a combination coffeemaker/coffee grinder and decided against it. Apparently, many combination machines leave a sludgy residue and are a hassle to clean. I preferred using my own grinder, which is easy to clean, and this coffee maker also very easy to clean and maintain. This machine is a coffee lover's dream!!
I bought the BEST! Very highly recommended!!
JANA
Whirlpool Part Number 2197381: Evaporator Fan Motor
- REPAIR PART NUMBER 2197381
- REPAIR PART FOR WHIRLPOOL, AMANA, MAYTAG, KENMORE AND MORE
- PART MEETS ALL OEM QUALITY STANDARDS MANUFACTURED BY A THIRD PARTY
Recently the refrigerator compartment wasn't cooling... spoiled milk was the first clue. This was in spite of the fact that the freezer compartment was fine.
I knew that if the compressor was bad it probably wouldn't be worth repairing this old fridge BUT it probably was OK since the freezer was working. Given the age of the refrigerator I was reluctant to call out a repairman when the meter is at $75-100 when they first show up. So I Googled "Whirlpool refrigerator not cooling" to see if I could get any hint as to whether or not it was liable to be a big problem.
MUCH to my surprise I found a lot of really useful information including several very helpful UTube tutorials. These videos provided trouble-shooting tips and detailed disassembly instructions.... once I opened up the freezer compartment (not at all difficult) it was clear from the hidden ice buildup that the defrost cycle wasn't working and that the ice was blocking cold air from the refrigerator compartment.
Several of these videos pointed to the automatic defrost system as the likely culprit and specifically to the bi-metal defrost thermostat.This thermostat is a simple on-off switch designed to keep the defrost heater from getting too warm and defrosting the food in the freezer compartment.One video even showed a test procedure to verify whether the defrost thermostat was faulty (involves a multi-meter and a glass of ice water, but a AA battery and a flashlight bulb would have worked). Sure enough it looked bad (and failed the test) so I went to the local supply houses to find one. They had generics in stock but those lack the clip-on feature. The delay for the clip-on part was four days and the cost was $35.... I could have gotten it just as fast and much cheaper through Amazon Whirlpool 2321799 Defrost Bimetal for Refrigerator. The only "skill" required to install the thermostat was stripping the wires and applying wire nuts and electricians' tape (see UTube if you want detailed how-to help with that).
While I was in there I noticed the fan motor was wobbly and somewhat sticky and thus seemed likely to fail soon. The fan motor is $65 from my local suppliers so I ordered this guy from Amazon. It was easy to install with my newly-found expertise at removing the freezer parts and fit perfectly... probably a 15-minute chore to replace.It works without wobbling and is very quiet and smooth turning. Everything good except my worrying.
Why worrying? The vendor delivered the part to UPS within 24 hours of my order but the UPS tracking system said it was going to take 16 DAYS to get here.... from CA to WA!! I kept checking and the UPS system kept reporting 16 days. It actually showed up in 5 days (three working days, which is normal UPS Ground from California), so it was all about faulty UPS reporting not any actual service problem.But if you were waiting for it to repair your main refrigerator it sure could cause some stress.
Whirlpool Part Number 8190281: HNDLE-DOOR
- THIS WHIRLPOOL 8190281 OVEN DRAWER HANDLE IS DESIGNED TO FIT MANY WHIRLPOOL, ESTATE AND ROPER BRAND
- RANGE/OVEN/STOVES. IT CAN BE USED TO REPLACE BROKEN, WORN, AND TARNISHED OLD HANDLES FOR BETTER
- GRIP AND TO EASE OPENING.
SPECIFICATIONS: - REPLACEMENT FOR HANDLE: 1013926, 8190281
- Works with the following models: Whirlpool RF265LXTQ0, Whirlpool RF265LXTQ1, Whirlpool RF265LXTQ2
- Whirlpool RF265LXTT0, Whirlpool SF265LXTQ0, Whirlpool SF265LXTQ1, Whirlpool SF379LEKS2
Frigidaire PureSource WF1CB, RF100, RG100, NGRG2000, RF-100, RG-100, NGRG-2000, 218994101, 21871780
We use our water filter a lot ... so we change it when the water starts to taste tacky, or funky....pull the filter out, and you can see some small particles! Pretty cool...These work well, about 6-8 months, unsure how much water we put through it, but it's a lot, haha...100L camelbacks every few days + ice cubes, if it uses that filter?
Whirlpool GX2FHDXVQ Gold 22 Cu. Ft. White French Door Refrigerator - Energy Star
The WIDTH listed here is 30". Everywhere else I look this is a 32" Refrigerator.
I'd just hate to see you order something that doesn't fit in your space.
It's probably a very good appliance, but it's 32" and not 30" as stated above.This refrigerator does indeed keep food cold, or frozen. The only distinctive quality that I should mention is that the various drawers feel cheap, made of thin plastic and easy to pull all the way out and onto the floor. Our older, occasional use, refrigerator is sturdier.
Buy Whirlpool GX2FHDXVQ Gold 22 Cu. Ft. White French Door Refrigerator - Energy Star Now
We went back and forth for a while on refrigerators.Very happy with this one, and my wife loves it.Have not had any issues had it for a couple months.
GE GTS22KBPCC 21.7 cu. Ft. Top-Freezer Refrigerator - Bisque
AVANTI 3.1 CF ALL REFRIGERATOR / AUTO DEFROST / BLACK
- 3.1 Cu. Ft. Capacity
- Beverage Can Dispenser Holds up to Eight 12 oz. Cans
- Space Saving Flush Back Desig
- 2-Liter Bottle Storage on Door
- Full Range Temperature Control
Buy AVANTI 3.1 CF ALL REFRIGERATOR / AUTO DEFROST / BLACK Now
It cools nicely. The smoked door is not what I thought it would be... I like it the way it is, but I was expecting a little more smokey... :) Nice little fridge!
Read Best Reviews of AVANTI 3.1 CF ALL REFRIGERATOR / AUTO DEFROST / BLACK Here
I have bought several of these coolers and have had no problems.Hopefully I never will.

