GE WR57X10050 Water Valve for Refrigerator

• Water Valve
• WR57X10050
• 1 year manufacturer warranty
• Genuine GE factory part

Much cheaper to order the part from here than the company.And not hard to replace by yourself. 5 Stars

Buy GE WR57X10050 Water Valve for Refrigerator Now

The valve is precisely the right one for our fridge which, due to failure of the original valve (6 years old) resulted in a massive icemaker leak and flood. A repairman said the icemaker needed replacement and probably the motherboard, but I tried to use the KISS principle and Kept It Simple Stupid. I first replaced the least expensive element, which solved the problem of continuously flowing water far more cheaply than the repairman's suggestion (which wouldn't have helped at all). As it turned out, after studying available documentation I was also able to repair the icemaker by re-engaging a spring to a cam (disengagement prevented proper operation of the ice sensing horizontal-sweep arm which thus initiated operation of the failing valve that did not shut off water flow). After a number of months, the replacement valve continues to operate as expected.

Read More >>

GE Refrigerator Filter Bypass WR02X12343

• Bypass plug for select GE refrigerators using the MSWF filter.

For those of you that already have adequate water filtration systems, you can save the cost of replacing the GE water filter by purchasing and installing this filter by pass.Water filters need to be replaced periodically or have the potential of deteriorating the water quality and the one in your refrigerator is no exception.This bypass eliminates the filter and has a side benefit of substantially increasing water flow from the tap.Easy to install, less expensive than a new filter, and permanently eliminates the double filter maintenance cost when your refrigerator is connected to your water filtration system.

Buy GE Refrigerator Filter Bypass WR02X12343 Now

I didn't check the models well enough, but the seller swapped it out with no problem!Thanks!I have a reverse osmosis device in place before the water gets to the fridge, so this about doubled the speed the water comes out of the fridge now!

Read Best Reviews of GE Refrigerator Filter Bypass WR02X12343 Here

I bought this filter bypass because our water dispenser wasn't working and I assumed we needed a new filter.It turned out it wasn't the filter but a problem with the valve for the ice dispenser.After much research online I found this is a common problem with our GE fridge.As it turns, I'm glad we have the bypass.Our water tastes fine out of the tap.

Want GE Refrigerator Filter Bypass WR02X12343 Discount?

Expensive piece of plastic that does exactly what is advertised.The fits into the opening for the water filter for specific models of GE refrigerators. I got this because my water dispenser stopped working and a technician suggested that a clogged water filter might be the culprit. It wasn't the water filter. If you don't care if you're drinking unfiltered tap water from your fridge then this will save you from having to continually purchase their filters.

Unfortunately this one did not fit my GE side by side.It is well built and I'm sure works great in the proper models.

Read More >>

Amico Plastic Case 22 Ohm 2 Pins PTC Starter Relay for Refrigerator

The Starter Relay worked well, but my problem was a bad compressor motor.It started up and ran fine, but after an hour or so the motor overheated and seized up and stopped.

Read More >>

Bosch SHV43R53UC 300 24" Custom Panel Fully Integrated Dishwasher - Energy Star

• Stainless Steel Tall Tub,InfoLight Beams on the Floor to Indicate Dishwasher is Running
• Saves up to 280 Gallons of Water Each Year,Exceeds ENERGY STAR Requirements for Water by 69%
• EcoSense Reduces Energy Usage by up to 20%,Half Load Cycle for Small Loads
• AquaStop Leak Protection,14 Place Setting Capacity,300 Series Racks
• Manual Height Adjustment Upper Rack,Long Silverware Basket

I paid a fortune to get a quiet, fully integrated dishwasher that I could cover with a cabinet panel.The warranty was for 5 years.Guess what?The thing just died in year 6.It cost me nearly $200. dollars per year to own this piece of junk and this was a summer home only.The print on the controls faded out in the first year and I never liked that you had to turn a power switch on and off.Now that the appliance guy gave me the bad news --and as soon as he heard I had a Bosch he groaned, I'm marching to the store to get a Kitchen Aid, even without the custom panel.My Kitchen Aids have lasted 15 years.Live and learn.

Buy Bosch SHV43R53UC 300 24" Custom Panel Fully Integrated Dishwasher - Energy Star Now

i usually do not send in reviews for products as i am much too busy but i am so very impressed with this dishwasher. I finally can load dishes right from the table without rinsing them! we had this dishwasher for 2 months now and not one dish came out dirty. its also very quiet.

Read More >>

GE WR49X10173 Dispenser Water Tube Heater for Refrigerator

• WR49X10173
• WR50X10044
• 1 year manufacturer warranty
• Genuine GE factory part
• Dispenser Water Tube Heater

I was excited to receive this product because my water dispenser had been inoperable for several months.It was relatively easy to splice in.The problem is, if a frozen item is placed too close to the inside of the freezer door, the unit still freezes up.I've found that leaving the door slightly open with the dispenser light on will thaw it out in an hour or two but I feel like this shouldn't be happening.After paying for a fix to GE's problem I would like it to solve the problem permanently.This one works 80% of the time but I still end up having to thaw it out the other 20%.

Buy GE WR49X10173 Dispenser Water Tube Heater for Refrigerator Now

3 years that's how long it's been since my water dispenser worked. The fridge is 6 years old. I was out of ideas when all of a sudden I learned about this part. I'm pretty handy with tools soI wasn't intimidated by this project. The repair itself took only a couple minutes, but I spent a lot of time cleaning the dispenser area since it was the first time I'd taken the front off the refrigerator and it was pretty groady back there. Within a half-hour we were drinking chilled water again!

I agree that the directions were not great. I was lucky enough to find an actual picture on Google where someone had taken a picture of the heater installed. It actually is easy to figure out from there. Just paste the model number of the heater in Google and there will be numerous pages detailing how to do it. I wish I knew about this years ago!

Read Best Reviews of GE WR49X10173 Dispenser Water Tube Heater for Refrigerator Here

wasnt sure if this was gunna work, but it did within 24hrs.I had running water again.The instructions actually say to do a test to make sure this is the problem (a frozen water line)It says to check at the bottom of the door, under the fridge, for a blue connector.You disconnect this at the connection and then push the paddle that you would to normally get water from the dispenser and see if there is any water that comes out of the disconnected tube.If there is water coming out then this piece will work to defrost and keep the water line from freezing.If there is no water coming out, then you probably have a different problem and this piece will not necessarily help you.I thought this was good to check first before buying this piece.The instructions for installing looks complicated but its actually pretty simple.Just stare at the paper a bit and it will start to make sense after you read it a couple of times.Good luck!

Want GE WR49X10173 Dispenser Water Tube Heater for Refrigerator Discount?

The part worked just fine, but the instructions were rather cryptic. I had to find an instructional video that some good Samaritan put together in order to complete the installation.But I did and it works!

Save 54% Off

Installed it using the provided instructions. Began working 15 mins. after it was installed and has continued ever since. Solid product.

Read More >>

Flexible Crevice Tool for all Vacuum Hoses

• 24" Long
• Flexible, bends up to 180 degrees
• Allows cleaning in hard to reach areas
• Great for dryer vents, heating ducts, along side the refrigerator
• Fits all vacuums accepting 1 1/4" inner diameter attachments

This thing is two piecesone end is the hard plastic end which attaches to the second end which is the flexible hose.The hard end has an inlet and that inlet is so small that it impedes substantial airflow to your vacuum.Moreover, even small objects cannot pass through this opening and it will clog up the inlet in no time.

This will cause your motors to overwork and fail prematurely.When you vacuum, it's like you're trying to vacuum with a sock stuffed in the hoses.I'm using that example so show how much less air will move through it.Moreover, you'll hear your motor scream.The inlet needs to be designed so that its opening is larger to prevent overly restrictive airflow.

You are warned.

Buy Flexible Crevice Tool for all Vacuum Hoses Now

While its not the most ergonomic device, the tool does allow you to get into areas a normal crevice tool will not. Great while it lasted.It is a 2 piece construction, consisting of a hard plastic vacuum hose connector and a flexible extension.Unfortunately, the hard plastic piece gets stressed when you bend the flexible portion.The end of the hard plastic connector that connects to the flexible extension broke off after less than 2 months of normal use.

Read Best Reviews of Flexible Crevice Tool for all Vacuum Hoses Here

The Item description says "Flexible Crevice tool for ALL vacuum hoses" not true it was too small to fit my vacuum.Come to find out it is a "1.25" I assume that is 1.25" diameter measurement.This item probably works fine but I will never know because it is not for "ALL" vacuums.Check your hose diameter before buying.

Want Flexible Crevice Tool for all Vacuum Hoses Discount?

The only caution is to measure your current hose to see if this tool will fit as it is very small.It did not fit my Miele vacuum, but fit my Shop-Vac.It does work well.Because the crevice tool is a firm but flexible plastic, it does not collapse with suction as I read happens with other similar devices.I was able to maneuver it into the lint trap and suction out the lint.Sometimes I had to bend the crevice tool into sort of a J-shape near the end so it would reach awkward areas, and it would hold that shape long enough so I could clean an area.Since I don't anticipate using this more than every few months, the bother of bringing the Shop-Vac into the house and fussing with the dryer lint cleaning is acceptable.Every dryer has a different lint trap configuration, so there is probably no "one size fits all" when it comes to a dryer cleaning extension.This is not quite everything I would like it to be, but it is good enough to give it 4 stars.Just be sure to measure well before you order.

Does not fit Miele canister vacuum.However I was able to use it for what I needed.

Read More >>

15" Built-In Wine Cooler

I just received this wine cooler for a small bar I'm building for my basement.I purchased it with the matching beverage center and was very impressed initially with the build quality.It looks amazing and stores a lot of wine (33 bottles) even though it's only 15" wide.The only negative thing (why I gave it 4 stars instead of 5) is that of the 7 shelves only the top one holds larger wine bottles, but it does hold 5 of them. I will update this review once I install and use it for a few months.

Read More >>