Whirlpool 25 Cu. Ft. Black Side-By-Side Refrigerator - ED5KVEXVB

Whirlpool 25 Cu. Ft. Black Side-By-Side Refrigerator - ED5KVEXVBWe purchased this refrigerator several months ago and have been very disappointed. It is poorly constructed and noisy.The shelves and drawers are very inferior quality and easily broken.There are not enough shelves and they are poorly arranged so we actually have less storage than we did with our old 25' refrigerator. This purchase was a bad mistake.



We got this refrigerator included with our house purchase (the builder was giving out free washer/dryer set but we already had one so asked him to go with a fridge instead).

We have been in our house for 6 months and the water filter needs replaced...normal wear and tear.We like the lock feature on the ice/water dispenser because our 17 month old likes to press the paddles.We have had to take drawers outto clean and it was tricky but doable. The storage shelves in the doors are easily movable and the freezer has worked well so far.We have a deep freezer so only use the small freezer for regular use items.

It isn't the fridge we would have bought ourselves, but for the money compared to what is out there we are happy with it.

Buy Whirlpool 25 Cu. Ft. Black Side-By-Side Refrigerator - ED5KVEXVB Now

One year and one week, just outside the warranty the auto-defrost thing broke.The back of the freezer is covered in frost.The top of the freezer wasn't cold which ended up thawing some chicken which dripped chicken juice into the ice bin. (I know better than storing meat on top but that isn't the point, I will review me elsewhere) Everything in the top half of the freezer had to be thrown out.Ice maker won't make ice now.I believe all the cooling happens in the freezer and then is blown into the refrigerator so all the food in the fridge is bad now.Beside the 1 year lifespan of the product there are some other things that bother me.

The water filter is nothing more than a timer.There is now way of knowing when the filter actually has to be replaced.Family of 12 will get the water filter light at the same time a single will.Water filters cost a lot, 60 bucks for two.Since the water is filtered I wouldn't think it would stain so much.There are big white stains on the drip plate but scrubbing it or putting into the dishwasher won't remove them.

The drawers and shelves in the refer section are very tough to get out.

Perhaps I just got a lemon and am not happy about having to fix a refrigerator after only 12 months.The first month it wasn't even used since the house was new and we hadn't moved in yet.Since then just two adults use it so it isn't getting beat up or anything.I can't imagine the fix to be cheapif I knew how to repair appliances perhaps it could be fixed for a hundred bucks or so but since I can't I am guessing just the repairman coming out will cost that much.Start counting in the cost of lost food and that easily will be over $100 with having to replace frozen meat, meals, mayo, milk, sour cream, dressings...

If this had not broken down then I would give it a three star review.Since it broke down so quickly I would give it a zero if that was an option.Since it isn't and I realize maybe this is just a fluke I will round up to two stars (remembering 1 is the lowest and not zero, if zero was the lowest it would get a 1).

Read Best Reviews of Whirlpool 25 Cu. Ft. Black Side-By-Side Refrigerator - ED5KVEXVB Here

We got this refrigerator to replace one that had been here for 20-30 yrs. Exact same fridge, we really didn't have a choice based on the hole in the wall. EVERYTHING scratches the front of this new refrigerator. Before I even moved in, it looks like contractors propped a broom or something against it which scratched up the front. We put a few magnets on the fridge.... completely scratched up the front!

I love the ice maker and water dispenser. The water runs slow, but we have it set up on a double filter.

Even with all the packing material and plastic films, the fridge had big greasy handprints on the sides when it showed up. I needed to use a de-greasing solution to get it off.

Want Whirlpool 25 Cu. Ft. Black Side-By-Side Refrigerator - ED5KVEXVB Discount?

This refrigerator Has serious design flaws in the shelving system.Two of mine have broken in less than two years and I have never put more than one gallon of milk and a few other much lighter weight items on them at a time. The replacement parts for one shelf are between $101 and $120 depending on place of purchase.This does not include the glass.It is just the plastic frame. At the current rate of breakage, I will have between $1000.00 and $1500 in shelf replacement if I keep this refrigerator for 10 years.--Don't buy it--it is a piece of junk and Whirlpool does not stand behind their product if it is over a year old.

Vinotemp VINO-300WC Economy Model Wine Cabinet Refrigerator, Dark

Vinotemp VINO-300WC Economy Model Wine Cabinet Refrigerator, DarkI decided to go with the Vinotemp 300 wc after lots of research. In order to make the right choice, you should be able to determine the following:

1. How many bottles are you planning to store (usually multiply what you currently have X 2 since having a wine cabinet will surely increase your wine buying habits)

2. Where will you put the cabinet? If you have a basement, that will be the ideal place, hence the unit does not need to be too flashy. You could also put it in your garage, if you have the room. Regardless, and unless you store it inside the house you must choose at least a 2,500 BTU unit... If you're thinking about having it inside the house, a 1,500 BTU should be enough (that's the standard)

3. Noise you should consider how noise is the unit, especially if you want to have it inside the house.

4. Shipping it is always really expensive. However, there are tons of promotions for free shipping

5. Door if you want it inside the house you can chose a glass door. Anywhere else, a solid door works best.

6. Temperature zones you don't really need more than 1 zone. You can usually keep the white wine on the bottom of the cabinet, where the temperature is a bit lower.

7. Shipping timesMost of these cabinets will take anywhere from 3-8 weeks to be delivered after you place the order. Check to ensure the unit is in inventory and ask about shipping options/timeframes.

for a great resource please click here:

Now, unfortunately, I did not take into account the lack of humidity controls on the Vinotemp unit. This is an issue for me, given that humidity in the cabinet is around 54%. I had to purchase an additional humidifier (additional $ 200) and have it running inside the cabinet in order to achieve 70-80 % humidity. This is something that the Vinotemp sales rep did not care to mention when I spoke to her. She said that the unit "promoted the right conditions for wine aging" which is clearly not the case.

I purchased the unit from Sam's club. Horrible experience. I waited 8 weeks to get delivery. Sam's club still advertise the unit as being "in stock"..."Cheap Sales Tactic" IMHO. All Vinotemp units are made to order. No one keeps stock. If they tell you the unit is in stock they are probably flat out lying or do not know how Vinotemp works.

Back to the unit itself, the outside finish is "not as nice" as it seems online. Luckily for me, the unit was intended to go in the garage. The inside rack (2 bottles go in each cubby hole) is just great, just like a real cellar. The overall feeling is sturdy. That's a big plus over other great units, such as Eurocave , which have trays (not a fan of trays). However, based on my experience, it seems that the Eurocave is a very strong contender, if not better but also more expensive than Vinotemp.

About Vinotemp, the company. Their customer service is HORRIBLE. I registered my unit online as soon as I received it. They don't have any records of the registration. They still cannot find me on their support computer (after 6 calls and 1 product registration, only 2 months after my purchase), and their customer service folks will never call you back. It puzzles me how bad their support is for products that are over $2,000...One should expect much more.

I hope this review is helpful. Feel free to drop me a line at jbastante@gmail.com.

Save 36% Off

AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-pack

AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-packEasy to replace filters are an excellent way to keep filtered/cold water available 24-7. Best price that I could find. Performs as well as OEM filters.

Works well for the cost. Can't tell a difference between these and the OEM. Would buy them again in the future.

Buy AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-pack Now

This filter works fine and the water and ice are great.No problems whatsoever.

I recommend this filter to all.

Read Best Reviews of AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-pack Here

Haier HBF05EBSS-2 Dual Faucet Kegerator w/ Stainless Steel Door

Haier HBF05EBSS-2 Dual Faucet Kegerator w/ Stainless Steel Door
  • Includes 2 American "D" System Sankey Lever Handle Couplers
  • Includes: Premium Pro Series Double Gauge Co2 Regulator with Co2 Splitter & CO2 Tank (empty)
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
  • Black Exterior, Stainless Steel Door, Rounded corners door style
  • Heavy duty casters for mobility

I would not recommend Haier kegerator, unless you like warm beer. I set it to it's coldest setting let it run for a day and the coldest it got was to 46 degrees Fahrenheit. As you know there's nothing better than warm beer. The really bad part of this is my wife ask me what I wanted for xmas, and I said I wanted a Danby kegerator it came highly recommended by a good friend. When she called "Beverage Factory" they said that Danby has a problem getting cold enough to get the beer to it's coldest optimal temperature. That they highly recommended Haier, but if you read between the lines what there really saying is that they get there most optimal profits selling haier. I also don't recommend the beverage factory. They never ask what kind of beer that you like to drink and that different beers have different types of couplers. So they just send off the standard American coupler. This doesn't work for Imported beers. Just bad all the way around, not to mention I probably lost a keg of Bass. The beer Gods are going to be very, very upset. "Don't buy from Beverage Factory" Try not to buy China Cr@p buy something thats made in the U.S. you can't go wrong. Good luck everybody and the next rounds on me!

Buy Haier HBF05EBSS-2 Dual Faucet Kegerator w/ Stainless Steel Door Now

I bought this kegerator for my boyfriend for Christmas and it's exceeded both our expectations.The kegerator is sleek and stylish and fits in great in our living room.We're now the place where all of our friends want to gono more hanging out at local bars paying for overpriced beer when we can experience this at home!We got the D system coupler for Fat Tire and an S coupler for New Castle and Stella.The only bummer is we can't have two import kegs in there at the same time but that's not a big deal.Overall, we're really happy with our new "toy" and I'm really happy with the service provided thus far with Beverage Factory!A+++!!!

Read Best Reviews of Haier HBF05EBSS-2 Dual Faucet Kegerator w/ Stainless Steel Door Here

I GAVE THIS PRODUCT A POOR REVIEW BECAUSE OF THE FIT AND FINISH OF THE UNIT,ADDITIONALLY 1 WHEEL WAS BROKEN AND NEEDED REPAIR PRIOR TO USE.

I WOULD ABSOLUTELY NOT RECCOMEND THIS UNIT.

P.S. ITS A LITTLE DIFFICULT TO PACK UP AND SHIP BACK.

Want Haier HBF05EBSS-2 Dual Faucet Kegerator w/ Stainless Steel Door Discount?



This was ordered for my son for his new home, it is still in the shipping box, they won't be in their new home until August 1st, however, there was a glitch in the delivery, I contacted the shipper and they answered me immediately and said they would check into it, in the meantime we finally heard from the trucking company and made the arrangements to have it delivered, they were supposed to call 1 hour prior to delivery to be sure someone would be there, they didn't and by dumb luck my husband happened to return home right after the trucking company got there. It wasn't the fault of the dealer just wasn't follow up by the trucking company, but in the end it all worked out.

Haier HNSE032 3.2 Cubic Feet Refrigerator/Freezer, White

Haier HNSE032 3.2 Cubic Feet Refrigerator/Freezer, White
  • Full-width freezer compartment
  • 2 dispense-a-can storage compartments; fits up to 8 cans
  • 2 full-width interior glass shelves
  • Gallon door bin accommodates tall bottles
  • Foam reinforced interior door liner

This is a very good product I've had for a while. The freezer part is small but it works for tv dinners and ice cream it even freezes ice cubes. I really like it. You don't have to defrost very often either and it keeps beverages very cold I'm glad I bought it

Buy Haier HNSE032 3.2 Cubic Feet Refrigerator/Freezer, White Now

Exactly what I needed for an efficiency apartment that I added onto my home for my mother.It holds her drinks and snacks, which is very convenient for her, and is bigger than those tiny little dorm units.Anyway, it works great and is, thankfully, quiet.Don't know if I was just lucky or not, but it was delivered very quickly! I would recommend this for anyone who needs a small refrigerator.

Read Best Reviews of Haier HNSE032 3.2 Cubic Feet Refrigerator/Freezer, White Here



This was a Christmas gift for my son-in-law and he is very pleased with it. The refrigerator is small and fits in the closet in his office and no one even knows it's there! He is able to store milk and other items he needs.

Want Haier HNSE032 3.2 Cubic Feet Refrigerator/Freezer, White Discount?

I received this refrigerator in a timely manner. When assembling, I followed instructions closely, but the door was not staying closed. After troubleshooting (according to the manual), we found that there was an improper part on the unit which caused it to stand up lopsided. I rectified the situation by slipping a folded up paper plate underneath which works fine for now. It works well/cools well as a fridge, but when I called customer service to have the improper part replaced, they asked me to send an email. I have sent 3 total now, to no avail. This was 2 months ago.For this reason, I cannot recommend this product.

We like the refrigerator very much.We bought this particular refrigerator because it was the only one with a Gallon Door Bin.However, the Gallon Door Bin is NONFUNCTIONAL as it does NOT stay attached to the door when you open the door.The result is that the Gallon Door Bin falls to the floor along with the gallon of milk, etc.Haier could have done much better with a wire assembly like the Dispense-A-Can compartment in the door above the Gallon Door Bin.Other small refrigerators on the market have a wire assembly to hold a gallon of milk, and we would have bought one of them had we known of this problem.UPS delivered the refrigerator upside down but in good shape.Removing the top hinge cover without doing damage in order to reverse the door hinge was a little difficult but possible without instructions, and the top of the refrigerator below where the top hinge had been was a little dented and chipped.NONE of the problems in the reviews I read prior to ordering pertain to our little refrigerator.It arrived undamaged in a very timely fashion, it cools, it is not noisy, it looks nice in our laundry room, and it works perfectly for its intended use as a refrigerator to be used by a 37 year old son who has returned home due the difficult economy.We took care to let the refrigerator sit upright for 24 hours as per the instructions before plugging it in.This would have been a "5 Star" rating but for the problem with the Gallon Door Bin which we are unable to use.

Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW

Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW
  • Best Cleaning In The Industry Enabled By The PowerWash System
  • PowerWash Cycle
  • PowerSpray Technology
  • Optimal Dispensers
  • 10-Year Limited Parts Warranty On Washer Motor And Basket

Our old agitator died with a spurt of smoke and the smell of burning electrics!So we were off looking for a new machine.Our memory of our past experience with the Maytag Neptune mold incubator left us wary of buying another HE frontloader.We decided to look into HE top loaders, since that is what is mostly available at the retail stores.I read reviews rather extensively on the Internet and took a look at the available YouTube videos.The comments and complaints were simply dreadful.YET, my local retailer said that the Maytag Bravos MVWB705YW was the best model out there.And the model was rated highly by Consumer Reports.So with great fear and trepidation, we purchased it despite the complaints of various noises, breakdowns, poor cleaning, frequent unbalanced loads, leaking, premature end of lifespan, electronics failures, discolorations, scum cakings, moldy smells, and on and on.It simply amazed me that a major corporation could manufacture such a modern appliance that caused so much agony among its users.In the final analysis, most consumers felt that the machine was a waste of money.When I asked him about all this, my brother-in-law said that buying a new HE machine was a "crap-shoot" today.You had a 50-50 chance of getting a lemon.He wished me luck and said to let him know how we made out.So TODAY, the new Maytag Bravos MVWB750YW was delivered and installed; and it underwent its "maiden voyage."The first load consisted of towels.This became unbalanced, and the instruction manual said to let the machine run a "balancing" program.Well, it never stopped.So I powered the machine down, which emptied the tub.Then I restarted the machine on a RINSE/DRAIN/SPIN cycle.This worked fine, and the clothes eventually came out of the dryer with a clean look and fresh smell.The second load consisted of colored clothes; the third load consisted of whites.Both loads ran without incident and the outcome was fine for both.The tub of the machine is very spacious.The machine did not make much noise when it washed.It used a half-capful of HE detergent per load.We did not use fabric softener because people complained that it left scum in the tub.So we added fabric softener sheets to the dryer.After every 30 loads, you must use Affresh tablets on a special clean cycle to eliminate mold, bacteria, and scum.The retailer told me that the machine should last 7 to 10 years under normal use.However, if you have a big family and use the machine several times each day, the lifespan could be cut short.I could tell when I looked at the construction of the machine that it wasn't as robust as the outgoing machine.YET, OVERALL, I am quite pleased so far.We'll see how it goes.The best video on YouTube was the one that explained how HE toploaders work.Please remember to read and follow all the directions for the HE machine; this will give you the best opportunity for success!

Buy Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW Now

I absolutely hate this washer. I've owned it for 18 months now and every time I use it I regret the purchase. Here are some of the reasons I hate it.

1. It uses waaaaay too little water. When I bought it the salesman told me that the machine fills to the top of the clothes plus 1 gallon. That is simply not true. The clothes stick out above the top of the water by 9 inches. The water level is slightly adjustable by the soil level setting but this only changes the level by an inch or two. I have experimented for hours to try to increase the water level the machine is determined to keep the level low probably so that they can get their highest-level energy star rating. Now you may think that it is a good thing for it to use too little water but when you see how harsh it is on your clothes (item 2 below) and how wrinkled the clothes get (item 4 below) you will change your mind.

2. It is extremely harsh on clothes. When I bought it the salesman told me that the machine is more gentle than older style agitator machines. That is completely untrue. This washer pills clothes visibly with every single wash. Brand new towels appear old and worn after a few washes. Here is why it is so harsh. The clothes throughout the load are wet but they are not submerged in water. Only the bottom of the load is submerged in water. The washer tries to pull the clothes up and down into and out of the water at the bottom. It does so by twisting and spinning them, similar to the way clothes are twisted when you wring them out. This is harmful for clothes. When clothes are submerged in water (as in older washers) the water acts as a cushion against rubbing. The water is moved by the agitator and the clothes glide around in it. The higher the water-to-clothes ratio the more gentle it is on the clothes. The lower the water-to-clothes ratio, the more tightly the clothes are packed and the more abrasive the rubbing is. This washer is the most extreme case of a low water-to-clothes ratio because the clothes aren't even submerged at all. They are wet and rubbing hard against one another. To make matters worse the wringing action, which is done very tightly, is very harmful for anything but the sturdiest of fabrics. Imagine taking a wet shirt and twisting it as hard as you can from end to end in a wringing action. This is what clothes endure during each load.

3. There is no way to wash delicates in this washer. For all the reasons mentioned in 2, there is no setting on this washer that is acceptable for delicate clothes. The handwash cycle on this washer is much harsher than the normal cycle was on my old washer. None of my work clothes can tolerate it.

4. Clothes come out incredibly wrinkled, twisted, and knotted. As mentioned in 2, this washer needs to twist and knot items to move them in and out of the water. When the load is done they remain this way. Bras are all knotted together in one giant mess that takes forever to undo. I have to first shake items out to untwist them and then dry them on a higher heat setting than I would otherwise use to get the wrinkling out. Use of the lower-speed spin cycle doesn't really help much because the problem is largely due to the washing portion of the cycle. The high-speed spin cycle only sets the twisting in even harder.

5. There is no way to change washer settings after the load has started. How many times have you started a load and then decided, "oops I'd rather use handwash" or "I'd rather use high-speed spin after all". Well forget about changing your mind on this washer. This washer goes through an extensive calibration cycle at the beginning of each load to figure out how much water to use. The calculations it does during this time are based on the cycle settings such as soil level, load type, etc. It can't let you change settings once the calibration cycle has started because its calculations will get messed up. Maytag says that all you need to do is press cancel and restart but what makes this so incredibly annoying is that cancel drains all the water from the washer. It often happens to me that I want to change settings after the washer is partly full of water plus soap. To make a setting change I have to throw away the entire load of water and soap. You wouldn't believe the amount of water I've wasted because of needing to press cancel.

6. The soak cycle wastes water and soap because once the soak cycle is complete there is no way to continue using the same water to complete a wash. It gives you no option but to drain the entire tub after the soak cycle. Then when you want to wash you have to refill it again and add more soap.

7. The calibration cycle takes a long time. As mentioned in 5, this washer goes through an extensive calibration cycle at the beginning of each load to figure out how much water to use. It takes about 5 minutes and makes the cycle take that much longer with the only benefit that it is deciding on the "optimal" amount of water to use. I would much rather have the level manually selectable and the cycle 5 minutes shorter.

8. The electronic smarts are very limiting and annoying. The salesman told me "this washer is so great that it won't allow you to damage your delicates". What he meant is that the washer limits your options depending on what cycle you have selected. So for example, if you have the washer set to the handwash agitation, it won't let you use high-speed spin or let you use warm water. Or if you use the soak cycle it wont let you use hot water. Or if you use the soak cycle there is no way to get delicate agitation. There is no way to override their setting limits. How ridiculous! I know better than some engineer at Maytag what options are appropriate for me. To think that they advertise this as a feature?!?

9. The lid locks. Sometimes when washing delicates I like to be able to keep the lid open during agitation so that I can assist with special pieces. This washer won't allow any cycle to continue with the lid open although I did find a way to bypass the lid lock function.

There is only one positive thing about this washer. I like the glass lid because it lets me see how harshly the washer is twisting my clothes.

Some reviewers here have commented that maybe I did not properly follow the instructions about how to distribute clothes within the washer. That is not true. I read and follow the instructions perfectly it doesn't help.

The first day after I got this washer I tried to return it but the store wouldn't take it back. I called Maytag and begged them to tell me how to increase the water level. I tried to pay a service person to increase the water level. I kept being told there is absolutely no way to increase the water level.

I am an electrical engineer and I got so frustrated with Maytag that I spent about 8 hours working out a way to make the water level on this washer adjustable. It requires adding a potentiometer (variable resistor) to the control board that is accessible from the top of the washer. The potentiometer adds an offset of water to the level. Right now I have it set to add an extra 10 inches of water so that the clothes are completely but just barely submerged. It makes a huge difference in wear and tear on clothes and makes the handwash cycle usable. The washer is now just barely bearable. If you want to use my technique for adjusting water level, email me at sueonline@gmail.com and I'd be more than happy to share the method with you (for free). I even have pictures showing the control board modification.

UPDATE: During the past 12 months I have recieved about 500 emails from people who purchased this washer and are searching online for how to increase the water level. They come across my review and email me. I hear the same story over and over again from them. They bought this washer and hate it fiercely and want help increasing the water level. I am including below some examples of the email responses I've gotten to my review. I have not edited these emails these are the exact words of others.

"I was so happy to find your review of the Maytag Bravos washer on Amazon.I too have this washer and share the same frustrations.I have missed my "old fashioned" washer since the first wash!My family and I spent the holidays with family out of state who had a machine that actually fills up with water and allows you to manipulate settings.This was the highlight of my vacation...lol!"

"We read your review on the Bravos Maytag washing maching and totally agree. I have had mine about the same amount of time and I am completed frustrated. It just doesn't wash the clothing. If you would be so kind as to send us your fix, we would greatly appreciate it. My husband is a mechanical engineer and will happily rip into it; otherwise, I may just go back to my old machine in the basement."

"I agree with your entire post! I never thought to ask can I soak clothes in this produce? I have tried to soak socks and there was not enough water to cover them. This washer and dryer pair does not work as advertised. Could you please send the water adjustment and computer map."

"Hello,I read your review on amazon.com and would really appreciate your information on how to increase the water level. I bought the machine 5 days ago and completely agree with your review."

"Kudos to you for a comprehensive break-down of frustration of the Maytag BRAVOS!Bravo for nothing this machine is the bane of my existence.It is ruining our clothes and gone are the days when we could simply dry laundry on the line now every last bit has to be 'fluffed' in the dryer to remove the annoying wrinkles!If you would kindly provide the details of how you 'outsmarted' your maching re: water level, that would be great!"

"could you please send me your instructions on how to fix my piece of junk washing machine?... is this something that i could have an electrician fix easily?... thanks so much for your help..."

"Your description of the water level problem is almost word for word my own, ion all its detail. If you can help, I would like to try to make the fix -assuming a simple home workshop kind of guy can do it with your help."

"Thank you so much for your Amazon review of the Bravos....I am not an engineer but I could have written your review! Dear Dumb Engineers at Maytag Who Have Never Apparently Done Laundry In Your Lives: WATER CUSHIONS THE CLOTHES!!!!!! WATER RINSES THE SOAP OFF!!!!! WATER HELPS REMOVE THE DIRT!!!!!! This washer is like taking your clothes to the river and beating them on a rock. My garden hose is outside the laundry room door; I have considered filling the washer myself! I have problems with stains, smells, towels getting "pulls". Delicate? Handwash? Good luck! And why does the "soak" cycle agitate?!!!"

"I saw online your review of the Bravos XL washing macine. We share you critic of this Maytag model. Could you please email us as to how you modified the Maytag to allow a higher water fill level. It would be much appreciated. I would like to modify the Maytag to make it useable. Thanks in advance."

"Thanks for the post on Amazon about the Brovos XL Washer. I'm very frustrated with all the points you laid out. If I could increase the water level that would be a great benefit and maybe I can live with the forced settings."

Read Best Reviews of Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW Here



We used this machine for 6 months, the problem is that it doesn't provide enough water to clean the clothing.Many white items we washed such as polo shirts, table cloths etc, came out with brown stains on them as there wasn't enough water to clean them.We put the cleaner tablet into the machine and even had a Maytag person check it out but it didn't help.We returned the machine and got one that has enough water to clean the clothing.In Maytag's defense they said that all the new HE machines have water limits imposed on them by the Gov, but that was not validated beyond what he said.

Want Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW Discount?

My husband and I purchased this washer after our Kenmore top-loader bit the dust.....never did like it and wasn't sorry to see it go after only five years. We got the best deal on the Maytag Bravos XL and since it's made by Whirlpool and made either in the US or Canada, it made it even more appealing to purchase.

Before it was delivered I got online to read reviews. This was the first site I had hit and after reading the very long-winded review from the engineer I was upset to say the least. Normally, I look at reviews before purchasing anything but this time I didn't and thought I was going to pay the price. I had my husband who is also an engineer read it. In his usual manner he shrugged it off and said, "We'll see."

However, I kept reading other reviews on other sites and some were starting to be positive and claiming that most of the negative reviews came from people who didn't follow directions so I decided to calm down, wait, and decide for myself.

Well, it's been one week and I've washed everything you can imagine, such as towels, sheets, comforter, delicates, jeans, etc. and every one of these loads came out perfect......no twisting of clothes, dry spots, or excessive wrinkling.

I don't have small children or a husband that gets extremely dirty so I can only go by what I'm used to washing but everything has been cleaned thoroughly.

Maybe it's because I'm married to an engineer and I know what they can be like but I've been laughing at the extent this person has gone through to get more water instead of reading the directions and following them. Maybe they just got a lemon...who knows.

At this point, I would highly recommend this product.

Save 13% Off

People, do yourself and your family a favor and DO NOTNOTNOTbuy this machine.Bottom line, it does not get your clothes clean because it does not allow adequate water for ANY CYCLES.I must wash each load, twice to even get close to getting them clean.Also, I discovered that I can only put in about 4 to 6 items MAX per load or they simply will not be adequately saturated (forget being submerged) with water.They don't smell clean even after a complete cycle, right out of the washer.I have gone to work several times only to start smelling a moldy smell on my clothes about 1-2 hours into the day.If I use fabric softener, it only MASKS the odors left in the clothes.I finally decided to use regular and color safe bleach in EVERY load to try to get them truly clean, and remember, each load gets washed TWICE !!!The LARGE CAPACITY is a JOKE because you should never, NEVER, put more than a few items in at a time.This machine DOES NOT save time, water, money or anything.The only positive thing I have to say is that the high speed spin gets a great deal of moisture out of the clothes (not that there was a great deal to begin with) and so the drying time is less.Keep searching people.Do not assume, like I did, that the negative reviews were from competitors or "less than tech savvy" people who simply could not operate modern machinery properly.THIS ONE IS A REAL LEMON.I would give it NO STARS, OR NEGATIVE STARS if I could but this particular site doesn't allow that.

Frigidaire FRIGIDAIRE 5304458371 Icemaker Assembly

Frigidaire FRIGIDAIRE 5304458371 Icemaker Assembly
  • THIS FRIGIDAIRE 5304458371 ICEMAKER ASSEMBLY WORKS WITH MANY FRIGIDAIRE, ELECTROLUX, KENMORE
  • GIBSON AND OTHER REFRIGERATOR/FREEZERS

Works very nice. I'm happy I bought it. Installation was a snap. Two phillips head screws that you don't have to take all the way out, and one simple electrical connection. Now I have lots of ice!

Buy Frigidaire FRIGIDAIRE 5304458371 Icemaker Assembly Now

Highly recommend works great! Easy to install. This was the best deal we could find. Definitely beats having to order one from the manufactor .

Read Best Reviews of Frigidaire FRIGIDAIRE 5304458371 Icemaker Assembly Here

It was the right one.Very easy to swap out.Our old one would just keep cycling, and dumping water into the tray, eventually flooding the freezer.This one fixed the problem.

Want Frigidaire FRIGIDAIRE 5304458371 Icemaker Assembly Discount?

Appliance guy told me about $250 to $300 to fix, and that was "iffy" since it could be another part!!......I said no thanks.Got on Amazon and put in my refrigerators model number and got a hit on this.I figured I could take an $80 shot in the dark, boy am I glad I did!!Only took a few minutes (one plug and 2 screws) to install and the ice maker is producing like the day we got it.Only wish I had done it sooner!!

Save 51% Off



I got this to replace the one that came with my fridge and broke after 3 years.This was easy to install and works perfectly. Only gave 4 stars because when it arrived the front plastic cover was cracked.I'm not sure who's fault that is but I didn't care since I just used the old ones cover but if you are going to use this as a new one it might be worth noteing.