Kenmore HE2 Plus washer bellow 8540952 AP4379904

• Kenmore HE2 Plus washer bellow 8540952 AP4379904

My old bellow on my washer was accumulating a black mold and no amount of cleaning could get rid of or prevent it. I read online the product is easily replaced following these instructions. (repair manual for HE2 washer same as whirlpool duet:

The hardest part was putting the outside spring wire that holds the bellow in place, back on. What worked for me was to use two sets of needle nose pliers and grab both ends of the spring and pull the spring apart while placing the wire around the bellow. It took me about 1 hour to remove and replace this piece, mainly because I cleaned the inside of the washer and I also cleaned the filter (located at the bottom of most front load washers you already have it open you might as well). It was a good thing I cleaned the filter it was full of mildew smelling garbage and about $1.50 in change. This is not a hard task to complete, and it is cheaper than buying new or hiring a repair guy.

Buy Kenmore HE2 Plus washer bellow 8540952 AP4379904 Now

Not a 100% perfect fit, but it works. Appears to be wider than the original, but in spite of that, it does seal and it did not leak during the initial test.

Read Best Reviews of Kenmore HE2 Plus washer bellow 8540952 AP4379904 Here

This product is a great replacement when you need it for your washer. This part tends to collect with mold and begins to smell. The installation is a little difficult but it can be done. Putting the tension band back on to the washing machine is the most difficult part and I needed the wife's hands to help. I will tell you this, replacing this part saved me from buying a new machine and saved me quite a bit of money. There are no compatibility issues at all, everything was a snug fit and there are no leaks.

Want Kenmore HE2 Plus washer bellow 8540952 AP4379904 Discount?

I bought this after the original one got a rip in it. The washer (Epic Z) is only 1-1/2 years old, but has always leaked around the seal.

We read up on it and thought it was because we were overloading it.

Then my wife accidently tore the bottom and it started to leak more.

Ordered the bellow, and it only took about an hour to replace. Watched a how-to on Youtube first.