Showing posts with label chefmate mini refrigerator. Show all posts
Showing posts with label chefmate mini refrigerator. Show all posts

Westinghouse Refrigerator Defrost Timer 215846602 5300187484

Westinghouse Refrigerator Defrost Timer 215846602 5300187484
  • Timer, defrost - Specs: 60hz, 120v, 8hr. 30min.

A fraction of the cost of local and manufacturer price.I was able to install it myself, it shipped fast and has worked correctly ever since.

Buy Westinghouse Refrigerator Defrost Timer 215846602 5300187484 Now

My fridge was not working as its freezer was not cooling at all. My troubleshooting pinpointed the fault with the timer. Got this timer from Amazon and it needed 10 minutes to install and viola the fridge was working perfect. I had ordered a defrost thermostat just in case that it too required replacement but after replacing the timer the fridge was fine so I didn't replace the defrost thermostat.

Read Best Reviews of Westinghouse Refrigerator Defrost Timer 215846602 5300187484 Here

Defrost timer went out on my 'beer' fridge.

I searched the part by refrigerator model number and it was going to cost over $40.

I did an Amazon search for 'defrost timer' and sorted by price.

Checked the amps, volts & hertz and figured that this should be close enough.I liked this price a lot better.

Works fine on my fridge.

Want Westinghouse Refrigerator Defrost Timer 215846602 5300187484 Discount?

easy to install as well.

The fridge is working fine now and I saved a ton of money because I fixed it myself.

Replaced it with the Defrost thermostat at the same time.

doeswhat it should , simpleeffective fixforabrokenfridge , would recommendto people havinga defectivefridge

5.oo vs 500.00easy task

Whirlpool 8212638RP 6-Foot Industrial Braided Fill Hose with 90 Degree Elbow, 2-Pack

Whirlpool 8212638RP 6-Foot Industrial Braided Fill Hose with 90 Degree Elbow, 2-Pack
  • Braided nylon-shielded hose performs better than stainless steel
  • 90 degree elbow saves space and helps prevent kinking
  • Dependable crimp is industry's most reliable against leakage
  • Built-in washer and hose made of long-lasting EPDM rubber
  • Fusion-resistant coupler and non-conductive surface

The hoses that came with my washer were marked "replace every 5 years". While few probably pay attention to such things, I know *far* to many who have had hoses leak, or worse, burst when they're not home and cause huge problems. Washing machines used to almost always be in basements, garages, etc. where a water leak might be onto concrete. That can still cause lots of damage to whatever is sitting on the concrete but the house itself is less likely to suffer serious damage.

But the trend in new homes is to put the laundry room near the bedrooms so it's often on the main floor or even upstairs. How much damage do you think might be caused if a hose bursts? It can easily exceed $100,000 in some houses. And the "pan" they sometimes sit under the washer on an upper floor won't catch more than a slow drip in just the right spot. When hoses fail they typically spray water several feet or more in random directions.

Long story short, it's cheap insurance to replace the hoses. And these braided hoses with right angle fittings are a significant upgrade over the plain ones that come with most washers. The right angle helps keep the hose from being kinked (which can make it fail) and reduces the stress on the hose if it's up against a wall (as most are) as the washer vibrates during the spin cycle.

The stainless hoses look nice but are kind of a gimmick in my opinion. The metal braid is just a sleeve over a plain rubber hose and water runs right through it. While it might help keep the hose from bulging and bursting under high pressure, that's not how hoses usually fail. Typically the rubber gets *harder* as it gets older and eventually starts to fatigue or even crack. They don't get softer and bulge out. So a stainless steel hose will probably leak just as easily as a cheap one.

These hoses, however, are different. The braided material is actually PART OF THE HOSE not just a sleeve slipped over the outside. So they're probably quite a bit stronger and less prone to failure than plain hoses. It's like the difference between a $5 garden hose and a $30 garden hose. The more expensive hose has a braided layer bonded into it that greatly prolongs its life.

The bottom line: These hoses are cheap insurance. They also come in a straight (vs 90 degree right angle) version.

Buy Whirlpool 8212638RP 6-Foot Industrial Braided Fill Hose with 90 Degree Elbow, 2-Pack Now

I have been a fan of the stainless external braid hoses for various plumbing hookups, but the price/length value that this set represented was compelling.

There's a lot of FUD about the stainless external braid being "just a simple hose inside a braided shell", but the fact is that the braid provides both abrasion protection and mechanical support for the internal tubing, and I have sections of it that have been in service under pressure for over 20 years without a failure -and on hot water. I have never had any stainless-braided hose fail in service. I can't say the same for rigid PVC or CPVC plumbing, or even copper pipe.

I have no reason to expect this set to be superior to the braided stainless variety, and it certainly doesn't look as good.

But this set is definitely less expensive than a comparable length stainless-braided set, and I like the right-angle connectors on one end. The build quality appears excellent, and both ends were drip-free with moderate hand-tightening, indicating good mechanical tolerances and quality washers.

The one missing feature is a marker to distinguish the hot and cold lines. I marked the metal portions of one hose with red paint to indicate the hot circuit, but there really should have been a colored plastic sleeve or clip or tag or _something_.The lack of this feature (which is present in other washer hookup sets on Amazon) cost this set a star.

Read Best Reviews of Whirlpool 8212638RP 6-Foot Industrial Braided Fill Hose with 90 Degree Elbow, 2-Pack Here

These hoses are very light, yet they appear to be very sturdy. The 90 degree elbow gives me another two inches of clearance which I needed after replacing my old washing machine.

Want Whirlpool 8212638RP 6-Foot Industrial Braided Fill Hose with 90 Degree Elbow, 2-Pack Discount?



I got these after I noticed a leak in the ones I had. They were really easy to install and have no leaks now!

Save 29% Off

I bought this because it has larger internal diameter than usual hose (for faster filling) and for the whirlpool name.I always look for metal outside for the abrasion protection, but the description sounded like the outside wrap was something like kevlar.It is not.The nylon jacket looks rather cheap.I've seen high grade nylon wraps and they look shiny and tight.The wrap on this is dull and loose. I suspect the item description is exaggerated. I am going back to metal.

Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel

Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel
  • Freestanding 45-bottle wine chiller with sliding wood shelves
  • Front-venting design allows for building in under a counter
  • Dual-zones for red and white wines; 2 separate controls
  • Thermal-glass door can be locked; digital display; interior light
  • Measures 23 by 24 by 34-1/2 inches; 1-year limited warranty

We paid for and expected a high-end dual zone wine refrigerator.That's what we thought we had when I installed it.The appearance is indeed nice.However, there are two problems.1) Spacing is tight between the drawers.Some common size wine bottles cause the drawers to hang up.And, the tops of the bottles on the lower rack get hooked on the lower drawer, so opening the lower drawer pulls them out onto the floor.2)After giving the unit two weeks to stabilize, we found that the red wine and white wine zones can't reach their warmer and cooler settings unless the settings are only a few degrees apart.There is an opening between the compartments.Cold from the white wine section (they set it up so the cooler temp rack is on top) spills to the lower section making the reds way to cold (or the whites to warm, if you change adjustment ranges).With the red zone set to 65 and the white zone to 45, the actual stabilized temperatures indicated on the read outs are 53 and 48.That's not much better than having all the wines in one refrigerator.

Buy Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel Now



I concur with the previous review can't fit any slightly non-standard wine bottle, catches on other drawers, but most temperature.Somebody was not thinking when the put the hot under the cold and the cold above the hot.First can't meet the temperature you want, but completely illogical and wasteful of electricity.Unfortunately looking difficult to return as we ordered in Nov, but did not actually get installed until Feb.

And Vinotemp's customer service is absolutely non-existent, not returning any emails.Hence this review.Will probably think about reporting to those who give out "EnergyStar" awards.Suggest another category, "EnergyHogs" ok I'm an electrical/physics type and so the above infuriates me as this type of engineering is plain bad!!

So how do I really feel?

Read Best Reviews of Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel Here

I purchased this product for installation under a coffee / wine bar in our lake home. It is a very nice looking unit, but I cannot recommend purchase.

First, this box lasted only 3 years, and then simply quit. I took it into a qualified repair shop who diagnosed the problem as being a defective control board. Read a little on the web about Vinotemp, and you will see I am not alone with this problem. The part is advertised on their website for $47, plus $10 shipping, but no parts are available I have been out of commission since the end of August, and today's new forecast for parts availability is "3-4 more weeks." My repair man and I have both been in contact with Vinotemp, but nothing specific can be said when I will have my replacement part and my unit back to duty.

When it did work, temperature fluctuations ran 5 degrees or so over or under the desired setting. This may bother some people, but for me and the "mid-range" wine I stock, no big deal.

Far more disappointing is the seeming poor product quality, and the proven poor quality parts support.

To do over, I would buy a free-standing (versus built in, which is front venting) unit, as there are many on the market at far more attractive price points.

I'd recommend getting a different brand name.

Want Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel Discount?



We have had this wine cellar installed for 2 months now and have been impressed with its performance.The temperature control works great on the unit we have and chills and keeps its temperature gradient as programmed.As would be expected, temperature is much more stable as the quantity of bottles increases in the fridge.The only complaint is the spacing between the shelves.The proximity of the draws on top of one another does not allow any larger than normal diameter bottles to fit without interfering with other shelves.I should mention that the display shelf will only accommodate bottles that are slightly shorter but not to much wider than average.Of 12 different bottles we tried, only one fit, while still allowing the shelf directly above to open.

Overall, great fridge, it looks fantastic and keeps our wine stored at the proper temperature.

This cellar is a great size and with the stainless steel front and wood at the front of the shelves, it looks great built in to my pantry. Obtained this cooler about a year ago and it looks great. As to the other reviews complaining about the cellar design being poor with the colder section for whites on the top and reds on the bottom, I think they're misthinking. Although you can't have a HUGE temperature span between the two sections, I don't find that I want that for storing my wines and I assume it was designed this way because it takes less energy to keep a small compartment cold than a large compartment. Sort of like having the little freezer at the top of your refrigerator maybe? It definitely has been maintaining my desired temperatures properly. Anyway, I think the display shelves are handy and this Vinotemp looks great! Definitely wasn't disappointed and don't think you will be either.

Whirlpool Dryer Bearing Ring for Front Support 279441

Whirlpool Dryer Bearing Ring for Front Support 279441
  • BEARING RING KIT, FOR FRONT OF CLOTHES DRYER DRUM.
  • Works with the following models: Whirlpool LE6400XKW0, Whirlpool LE6680XPW0, Whirlpool LE6685XPW0
  • Whirlpool LE6685XPW1, Whirlpool LE6800XSW0, Whirlpool LE7680XMW0, Whirlpool LE7680XPW0

When our dryer started making grinding noises and chewing up clothes, my wife feared we would have to purchase a new one. Upon investigation I discovered the Whirlpool 3406129 Front Bearing and Seal for Dryer and Whirlpool Dryer Bearing Ring for Front Support 279441 were broken. I purchased the replacement parts on Amazon and completed the repair in under half an hour. We have since had no problems with our dryer.

n.b. I needed a TEKTON 2822 T-Handle Socket Screwdriver Set, 22-Piece to open the top and remove the front panel of our dryer. I also found a helpful video online demonstrating the repair.

Save 36% Off

Whirlpool 4396701 Quarter-Turn Top Mount Refrigerator Water Filter, 1-Pack

Whirlpool 4396701 Quarter-Turn Top Mount Refrigerator Water Filter, 1-Pack
  • For use in Whirlpool and KitchenAid top freezer refrigerators with filter access in the base grille
  • NSF certified refrigerator water filter retains beneficial fluoride in water
  • Reduces chlorine's taste and odor
  • Also reduces particulates, lead, mercury
  • Replace every 6 months

This was a perfect replacement for a Kenmore #9915 filter and $10 less.

Buy Whirlpool 4396701 Quarter-Turn Top Mount Refrigerator Water Filter, 1-Pack Now



Title says it all. I was looking for a new filter for my Kenmore fridge and this one fits it. The Kenmore filter part number is 9915 or 2301706.

Read Best Reviews of Whirlpool 4396701 Quarter-Turn Top Mount Refrigerator Water Filter, 1-Pack Here

I purchased 2 Whirlpool 4396701 refrigerator water

filters on line from Amazon.com a few weeks back.

I am very satisfied with the availability of this

filter required by my Whirlpool Gold Refrigerator.

I searched the internet and shopped around local

stores like Lowe's and Sears and found none that

could match the low price.The free shipping on

this item sealed the deal for me. Amazon.com has

not disappointed me with all purchases I have made

through them.

Keep up the good work, Amazon.com.

Retired Senior

Want Whirlpool 4396701 Quarter-Turn Top Mount Refrigerator Water Filter, 1-Pack Discount?



I used this to replace a Kenmore 9915 on a 106.76239402, and it was an exact match.I hadn't realized the water flow had been reduced so much until I replaced it.Granted, I've never replaced it before and I've had this refrigerator for several years.FYI, my manual covers models 106.762{32-34,36,39,42-44,46,49}402, and specifies 9915 for all.

Save 29% Off

After much research for a replacement Kenmore 46-9915 Refrigerator Water Filter at a more reasonable price (Kenmore cost, approx. $40), I found out that Whirlpool KitchenAid 4396701 Refrigerator Filter replaces Kenmore 46-9915 Refrigerator Water Filter and other Whirlpool filters.These filters reduce cholrine taste and odor, particulate class III, lead, mercury, benzene, p-dichlorobenzene, o-dichlorobenzene, etheyl benzene, toxaphene, and 1,2,4-trichorobenzene.Easy to replace, just push and turn.Price on Amazon for the Whirlpool 4396701 was(1 pack) with free super saver shipping.

American Retro AR-15002 Classic Coca-Cola Refrigerated Machine

American Retro AR-15002 Classic Coca-Cola Refrigerated MachineI bought this Coke machine from Amazon, and I had some reservations about buying it from the other review posted. First of all, if you are a Coca-Cola drinker, or like soda in general, you should get this. This thing looks great and has a great vintage look. Westinghouse actually made these machines in the '30s and '40s, and according to the manual, this machine was built to the exact specs of that machine. The manual says that the parts in this machine, and the old Westinghouse Junior machines are interchangable, which I thought was cool. I bought some Coke in glass bottles at my local Weis grocery store, and put them in, and they got ice cold in just a few hours. This thing looks like something Rick Dale restored. (American Restoration tv show)

It has an adjustable thermostat, and is built like a tank. I was worried about it arriving with scratches and dents all over it, seeing as how UPS and FedEx practice their soccer skills on our packages, but luckily it arrived in great shape. The other reviewer said that the lid doesn't shut all the way. I think he got a bad one, because mine shuts fine. Also, when the compressor kicks on, it's not that loud. It's no louder than a fan.

Anyway, I would definately recommend buying this. Coca-Cola is timeless. I just wish they made Coke in glass bottles on a grander scale in the US and made it more readily available in grocery stores. The machine looks and functions great. You'll love it!



I love this!I purchased this retro coke frig on Amazon.com and got it within the week.UPS wasn't gentle with it, so it left a tiny bump near the bottom but that was something that I was okay with and I will tell you why. The machine is amazing!Yes, it makes a small amount of noise when it is cooling but when the drinks are at the ice cold temp they need to be, the unit stops chilling until the temp drops again. Then it goes back on.I've had it for several weeks now and the machine works beautifully! The door closes tight and it's all in perfect working condition. I would buy it again!

The soda we get out of the machine is ice cold and ready to drink. My 17 year old son loves it!We love especially buying glass bottles for this unit as we can find them in the local grocery stores.I see the parts are interchangeable with the original unit this was modelled form. This retro model arrived to us new, a remake of an original unit. That means, we didn't have problems of rust or anything like that.

This machine has inspired me to turn our entire dining room into a retro coke look. Am I glad I purchased it? Yes!My husband is not a retro buff and says "there's the frig!"No thanks.When I reach in to get myself a diet coke in a glass bottle, my memories go back to being 6 and my dad letting me reach into the machine and so I could pick the ice cold soda pop I wanted.

A++++++++++++++++++++++++++++++!! :o)Well done, American Retro!

Buy American Retro AR-15002 Classic Coca-Cola Refrigerated Machine Now



Nice cooler.The door doesnt close completly and its a little loud when the compressor kicks on.Its great for an outdoor pavilion. We put a weight on the door to keep it closed.

Read Best Reviews of American Retro AR-15002 Classic Coca-Cola Refrigerated Machine Here

Looks absolutly great and authentic. A little bit louder than A regular refridgerator. The seller delivered on time as promised. Very happy I purchased it. The item actually looks like the old machines that I have seen on the new TV series "Pawn stars," and "American restoration," that are actually selling for Thousands of Dollars.

Want American Retro AR-15002 Classic Coca-Cola Refrigerated Machine Discount?

Lid that was on the machine needed replacement.A new lid was shipped immediately,but was in worse shape thanthe original.It is very noisey and runs probably 40 minutes out of an hour.I am in hopes of being able to resolve these problems but I'm taking one step at a time.I will be more than happy to update my review after everything is taken care of.

Save 30% Off

AVANTI 4.5 CF ALL REFRIGERATOR WITH LOCK / AUTO DEFROST / BLACK (ENERGY STAR)

AVANTI 4.5 CF ALL REFRIGERATOR WITH LOCK  / AUTO DEFROST / BLACK
  • 4.5 CU. FT. CAPACITY
  • Can Dispenser in Door Holds Five12 oz. Cans
  • Reversible Door - Left or Right Swing
  • Door Rack Holds 2 Liter Bottle

I purchased this fridge for my office, and generally I would say that I'm pleased with it. It looks good, however I wish that it was a traditional key lock, and not just a turning mechanism that brings down a small metal pin at the base of the fridge. The fridge also does not get super cold, but the cold temp it delivers is adequate, overall not a bad purchase.

Buy AVANTI 4.5 CF ALL REFRIGERATOR WITH LOCK / AUTO DEFROST / BLACK (ENERGY STAR) Now

Item was in horrible condition when I received it. The thermostat was completely torn off the side wall and the plastic piece that held it there was snapped in half. The door fell off because the hinges were bent. The balance peg was snapped off the bottom and one of the corners at the top was crushed in.

On a positive note, the packaging was in perfect condition!