Showing posts with label lg refrigerator. Show all posts
Showing posts with label lg refrigerator. Show all posts

Cuisinart DLC-2A Mini Prep Plus 3-Cup 250-Watt Food Processor

Cuisinart DLC-2ATQ Mini-Prep Plus Processor, TurquoiseWhen I starting searching for a mini-chopper I was surprised by the huge rating difference between the Cuisinart DLC2 and the KitchenAid KFC3100, so I bought both and did a side-by-side comparison.The only explanation I can give for the ratings difference is that Cuisinart buyers must have higher expectations.For most operations they have nearly identical performance and for some operations the Cuisinart is the clear winner.

Onions:Many Cuisinart reviewers panned its performance here, claiming it made onion purée, but most KitchenAid reviewers praised its onion chopping ability.I found almost no difference between the two.Maybe its an issue with the instructions for chopped onions you must use a few short pulses.A few more pulses and you get minced onion more than this and both give you onion puree.I wouldn't say either is great at chopping onions, but both are equally mediocre.

I also tested chopping nuts, and making breadcrumbs with similar results.Both performed about the same for a course chop, although the Cuisinart produced a more even chop on the nuts, but its when you want a really fine chop that the Cuisinart starts to shine.The first reason for this is the grind feature found only on the Cuisinart.This spins the blade in the opposite direction which allows the flat, back-side of the blade to impact the food.More importantly, it redistributes the food, so if you've got a couple of chunks that refuse to be chopped, a short pulse in the opposite direction helps it drop into the blade.For perfect, fine breadcrumbs Ialternate between the normal chop mode for a few seconds, and grind for one second.

The other reason the Cuisinart gives a better fine chop is that it does a much better job of cycling the food through the blade.This is a real key when you're working with softer foods like spreads, pâtés or purees.When I made a cream cheese spread in both choppers the Cuisinart did a far quicker and better job of pulling the ingredients down the center and into the blade.The KitchenAid kept larger chunks bobbing on top.If you're making dips, spreads or baby food, the Cuisinart is the hands-down winner.

On the practical side, both choppers were equally easy to clean.Both have small holes in the lid for pouring in liquids on the fly, but only The KitchenAid has a slot for dry or thick ingredients if that's important to you.Overall, I found the Cuisinart easier to use for several reasons.First, the Cuisinart blade drops on easily, while the KitchenAid blade is keyed and I found myself turning it several times before it dropped in.Second, the KitchenAid lid must be removed first before you can lift off the bowl, but on the Cuisinart, the bowl and lid can be detached as an assembly.Finally, the Cuisinart blade has a "handle" that extends to the top of the bowl like a popsicle stick allowing you to remove the blade without getting your fingers in the food.

After all my testing, I really can't understand the large ratings difference between these two.Neither is perfect you'll never get a perfect, even, course chop with things like onions or chocolate, but they do come in handy.For many uses either one will give you pretty much the same results.Because of its advantage with softer foods and its ease of use, I recommend the Cuisinart.



I got this as a gift from my boyfriend and have been using it regularly.This is one of those things that you don't think you ever need (and I did give this topic extensive thought), but once you have it, you would really miss it.

The good is that it is really good at FINELY chopping things.

The bad is that it is really good at FINELY chopping things.

Keeping this in mind, I've learnt when to use and when to just use my knife.For instance, when chopping walnuts for banana bread, I put a cup of walnuts into the processor and hit "Chop" it immediately chopped the walnuts into good sized chunks, but there was a couple of walnuts that didn't get cut yet, so I hit the "Chop" button a couple more times, but that turned the rest of the walnuts to a very small almost "powder" consistency.I tried it again, with about the same results.I guess I could try putting in less walnuts at a time, but then that would defeat the purpose of "less work" since I'd have to put in a small amount, chop, dump out the first batch, repeat.It's much easier in this case to do a coarse chop with knife.Chopping Mushrooms in this device also was lacking, it kind of made a mushroom puree.

Where it shines though is in my daily meals where I'm making some kind of pan sauce.Just about all my pan sauces or pan meals start with butter/oil, then saute'ing some garlic and onions.I'll just peel a few cloves of garlic, coarse chop an onion, dump it all into the MiniPrep, and presto, it's done!When I'm ready to dump it into my pan, just remove the co, remove the blade and use a mini-silicone spatula to dump the contents directly into the pan.A quick rinse of the lid, blade, and work bowl, and the processor can be put away.That can't be any easier.

For larger meals and more ingredients, it's great to just coarsely chop your items, dump into the processor, let it do it's work, and then fill up your prep bowls with the different ingredients making everything easier once you're cooking.

I find the "Chop" and "Grind" feature to be pretty much the same thing, just in opposite directions.The opposite direction thing is helpful to get the food to drop down to the blade.If you don't put too much in the processor, once the piece is chopped, it gets flung to the sides of the work bowl and sticks there, creating empty space for the unchopped foods to drop into the blade.Everything gets chopped evenly...it just gets chopped very finely too.

The entire unit is very easy to use and clean.The blades are extremely sharp, so be careful when washing those.The clear plastic work bowl does get a little scratched up and not so clear anymore after a bit of use...but then, it's a work bowl.The buttons are under a protective plastic, sealed so no chance of anything getting under the buttons, just a quick wipe and it's clean!

Overall, the unit is small, solid, quiet, easy to use, and easy to clean.It's great for fine chops to puree, not so great for coarse chops/dice.Perfect size for meals for 2 people.For making larger meals you may want to look at the larger cup sized processors, or just make a couple of batches.

Buy Cuisinart DLC-2A Mini Prep Plus 3-Cup 250-Watt Food Processor Now



I have the Mini-Prep and I have the big guy version, but I use the MP 10x as much.It does everything!Want chopped garlic? peel a couple heads, add 2-3T of olive oil and about a 1/4-1/2tsp. of salt.It keeps in a jar in the fridge and tastes a heck of a lot better than the store kind!Fresh herbs, nuts, peppers without burning hands...it's great!When I'm done, I just rinse it out.This is my favorite appliance after my blender, and if this made smoothies and margaritas, it would be my favorite!

Read Best Reviews of Cuisinart DLC-2A Mini Prep Plus 3-Cup 250-Watt Food Processor Here

I had this Cuisinart DLC Miniprep first, and was not happy with it. I wanted a small food processor primarily to chop up an onion and some garlic cloves, and with the Cuisinart, I pretty much ended up doing almost all of the chopping before I put the food in the processor, otherwise large sections wouldn't get cut.

After reading the reviews here about how the Kitchenaid has the reverse sprial action which pulls down the food, I thought I'd try that one, and it's true!!The Kitchenaid KFC3100 is a superior product!Now I can just cut the onion into quarters and throw in whole garlic cloves and it cuts them all up perfectly. If your not sure which of the two products to buy, get the Kitchenaid KFC3100!

Want Cuisinart DLC-2A Mini Prep Plus 3-Cup 250-Watt Food Processor Discount?

I read the reviews from others before buying the product--disregard the bad reviews about things turning to mush. The only way things turn to mush is if you hold the chop button down. If you do quick pulses, you get exactly what you want. This is the essential appliance because it helps to do exactly what the name says--prep. Often after coming home late I want to make a meal, but the thought of chopping onions, garlic or veggies seems daunting. Not with the mini-prep. It saves so much time.Plus I use fresh ingredients more often. I am completely happy with this product.

Save 47% Off

Vinotemp VT-28TEDS Thermo-Electric Digital 28-Bottle Wine Chiller, Black and Stainless

Vinotemp VT-28TEDS Thermo-Electric Digital 28-Bottle Wine Chiller, Black and Stainless
  • Freestanding digital wine chiller keeps up to 28 bottles properly chilled
  • Thermo-electric cooling system protects wine from unnecessary vibration
  • Ultra-quiet operation; does not use ozone-depleting chemicals
  • Energy-efficient dual-paned glass door; 6 pull-out shelves included
  • Measures 22 by 18-1/4 by 28-1/2 inches; 1-year limited warranty

Prior to purchase I had read various reviews about the unit's inability to properly cool. Despite the warning, I went ahead, hoping for better luck, as the unit had the best combination of price/capacity.I decided the best approach was to give the unit a trial run by getting it at my local target so that I could return it if it didn't work.I purchased a refrigerator thermometer along with it just to keep it honest. Sure enough, the unit was only able to knock about 10 degrees off of the ambient temperature, despite brazenly claiming to be at 56 degrees.

On the plus side, it was indeed quiet and sleek looking but it would've been nice to have some more cooling capability. For my purposes, however, this was fine.My intent was to prevent exposure to heat and I grew to like drinking my reds at about 65 degrees.

Flash forward one year and last night I reached into my cooler to find the bottles warm. A check of the thermometer showed that the inside of my vinotemp was now the balmiest spot in the house at 78 degrees. I tried cleaning the filter, unplugging etc. and once restarted the unit whirrs away uselessly; mindlessly warming the inside bottles. For $200, all I was able to coax out of this thing was a year of disingenuous underperformance.

Buy Vinotemp VT-28TEDS Thermo-Electric Digital 28-Bottle Wine Chiller, Black and Stainless Now

I got the unit from a target store on a great holiday sale. I probably wouldn't pay retail for it. I set it up and let it sit overnight, then plugged it in and let it sit overnight again. With the thermostat set at 55 (the lowest possible), my own thermometer placed inside reads 60. It seems to be able to hold at 60 pretty well as the ambient temp in my desert apartment fluctuates through the day (no higher than 80 for the ambient temp).

The 60 degrees is not the best temp for storing wine, but its really not that bad for my $20-and-under-per-bottle collection. As I understand it (after talking to lots of people), the extra few degrees will eventually cut short the life of the bottle, but should be fine for a few to several years. I don't think my wines will go un-drunk that long.

In summary, I bought this cellar/fridge to store my wines, not to preserve them for 20 years. I needed something that was between a closet and a regular fridge. I also wanted something that had low noise, so I went with this instead of a compressor model. I think it works well for these purposes, especially at the discount sale price. It looks nice and doesn't have too much extra bulk.

If you are looking for something for long term cellaring of finer wines, I would recommend looking for a slightly colder unit. If you just want decent storage, this may work fine for you.

(there's two of these same items listed on amazon with the same model number I own, so I put the same review on both one is VT28TEDS and the other is VT-28TEDS)

Read Best Reviews of Vinotemp VT-28TEDS Thermo-Electric Digital 28-Bottle Wine Chiller, Black and Stainless Here

We bought this cooler to store some of our $50+ bottles of wine we don't have a huge collection by any means, but just wanted to make sure some of the better wine didn't get destroyed by a hot CA day.

The fridge took a day or so to cool down after filling it to capacity.I haven't tried measuring the actual temp using a seperate thermometer, but it says 54 and feels about the same.Although initially it was very quiet, it does whirr regularly, but it's still pretty quiet considering we have it 5ft from our living room couch and it doesn't bother us at all.

I wrote this review so I could include the capacity since one of my biggest problems when looking for a cooler was that it's very hard to tell what will actually fit.At max we filled this cooler with 2 magnums resting on the bottom, 3 champagne bottles and 17 bordeaux/burgundy style 750ml bottles.It suprised me that there was enough room for all this.The magnums fit diagonally (and there's not a lot of space, but it worked) after removing one shelf and raising the other.You won't be able to fit more than 3 champagne bottles on one shelf, but if you removed every other shelf I could see someone fitting up to about 12 or so champagne bottles total in the cooler.Yes, you should be a little careful when removing standard bottles because the fit is a little tight (just lift up the shelf above slightly and you will be fine) but the idea is not to be adding and removing bottles all the time so I don't think it's a big deal.

Hopefully that gives people an idea of the size of this cooler.It's worked out perfectly for us.

Want Vinotemp VT-28TEDS Thermo-Electric Digital 28-Bottle Wine Chiller, Black and Stainless Discount?



This product is so good I bought a second one.I especially like the non-compressor cooling, which works very well.The digital readout indicates temperature to readily be maintained at my 60 degree setting, which I consider to be a good European wine cellar temperature.They are totally silent.I bought the first unit on Amazon, and the second from Target where it was on sale and much cheaper than the Amazon price. The unit's packaging was fine, and had no cosmetic damage.I have moved them twice within the family room without issues.

Save 5% Off

I just recently was given this wine fridge as a Wedding gift from my in-laws. I have to say that I am quite satisfied with it thus far. I was rather concerned when I first got it being that I instantly went online and checked out personal reviews of the product. It seems that on many different online sites including amazon, there are a lot of complaints that this fridge does not cool. To be honest, I am not having that problem at all thus far in the first week.

I followed the instructions, let it sit for over 2 hours prior to plugging in...then got it up and running. I let the fridge run for 2 days prior to putting any wine in it because I wanted to get a thermometer first to check the temperature since I had heard so many complaints regarding the temp. The fridge temp gauge read 55, and my thermometer read 57...quite close. I then put about 10 bottles in it and while having the door open the temp went back up to the low 60s. Well, I now have waited over night, and the temp gauge is reading 55 again...my thermometer is reading 56, and it appears to be working perfectly. I read many reviews that insist this fridge won't go below 60, or in some cases even below 65. I am clearly getting the right temperature on mine. All in all, great product so far.

NEW Replacement Part - FRIGIDAIRE ICE MAKER ASSEMBLY Part# AP4299334

NEW Replacement Part - FRIGIDAIRE ICE MAKER ASSEMBLY Part# AP4299334
  • Meets OEM form, fit and function standards
  • Original Manufacturer Part# AP4299334
  • ALSO COMPATIBLE WITH ELECTROLUX, KENMORE AND MORE

This unit is a more of a universal replacement for Frigidaire ice makers.It had a couple of differences from my original icemaker such as the switch was side ways, while mine was vertical. but generally over all it was close.It bolted up just fine and the electrical connections were identical.My only complaint is that the wire bail that is supposed to shut off the icemaker when the ice bucket is full does not work properly.I have physically lifted the wire bail and blocked it up and the icemaker does stop, but it will not stop if the ice builds up on its own.I have to wait until the ice bucket is full to overflowing and turn the switch off for a couple of days till the ice level gets down and then turn it on again.As I said, the unit works properly but the wire bail is not identical to the old one and won't shut off the ice maker like the old one did.A small inconvenience, but note worthy.And that is why I only rated it 4 stars.

SquareTrade 3-Year Appliance Protection Plan ($300-350)

SquareTrade 3-Year Appliance Protection PlanIf you go to the square trade website, you can customize your coverage and it asks if the appliance is new or refurbished.It will then give you a quote.I'm sorry you found out the hard way that this is what you would have to do.

I learned this only after spending about an hour on hold with them...Amazon shares some of the blame for including this in the suggestion algorithm for a re-conditioned item but still could have prevented a ton of wasted time and frustration if Squaretrade would have made their add clearer.

Buy SquareTrade 3-Year Appliance Protection Plan ($300-350) Now

Black Drinking Water or (RO) Reverse Osmosis System Faucet

Black Drinking Water or Reverse Osmosis System FaucetThe online product description did not indicate what kind of black the dispenser was; from the style and the picture, I guessed it was matte black.I was wrong.It is shiny black.That being said, the style is lovely and it feels like a solid, heavy piece.

Frigidaire 5303918214 Defrost Thermostat for Refrigerator

Frigidaire 5303918214 Defrost Thermostat for Refrigerator
  • Works with the following models: Frigidaire 31-2207-00-01, Frigidaire 31-2207-00-02
  • Frigidaire 31-2207-00-03
  • Frigidaire 31-2207-23-01
  • Frigidaire 31-2207-23-02
  • Genuine Replacement Part

did what it needed to do and much cheaper in price.I was afraid it would be lower quality because of the price but it worked great

Buy Frigidaire 5303918214 Defrost Thermostat for Refrigerator Now

This part was inexpensive and easy to replace. I removed the entire assembly and fixed it on my work bench.

Read Best Reviews of Frigidaire 5303918214 Defrost Thermostat for Refrigerator Here

What can be said about this? It came quickly and at a good price. It works just fine. Replaced this along with my ADC unit when the fridge was taken out by a faulty utility company transformer out front.

Home / House Drinking Water Filtration System - Cartridges made in the USA by KX Technologies

Home / House Drinking Water Filtration System - Cartridges made in the USA by KX TechnologiesI purchased this unit mainly because the housing is made by 3M.But since installing it, I am even more impressed at the quality of water that comes out of the faucet.To make it a plus, the filters are reasonably priced and last over 6 months.The water pressure that comes out of this unit is great.

I am a very picky person and looked for months for a filter I was not sure at first due to low reviews but looked at the company online liked it usa made and .5 Micron filter is very good.This is a very easy intalation shark bite fittings anda adaptor to fit on your flex line under sink no tools needed I would also like to note the sink fauset threds is metal! Not plastic like most are that snap off when tightened this is a good qwality filter and it filters well and replacements filter are well priced

Buy Home / House Drinking Water Filtration System - Cartridges made in the USA by KX Technologies Now



I have a refrigerator water filter.This one works better than that one and aides in filling all my pots, coffee machine and other fresh water needed areas in the home.The water is now drinkable.

Read Best Reviews of Home / House Drinking Water Filtration System - Cartridges made in the USA by KX Technologies Here



I am basing my rating on the fact I have had experience with the filters with this unit.They are some of the best.Also,the unit itself is very well constructed.I have not yet installed it as it came with no parts sheet, no instructions, and I'm not a plumber so I have had to contact the seller direct. While cordial and responding usually about 24 hours later (send a question during the day and sometime the next day get an answer), I still am not a plumber and some of their responses and hand written out diagram won't really help me.I currently have a different unit that is an RO unit and I'm replacing it with this water filter (not an RO).The fittings I have under my sink now will have to be removed (one plugged and I hope I have the drain cap plug for it) and then replaced with new parts sent in with the unit.This weekend I will bite the bullet and remove the old and install the new.I hope I won't end up with either a leak from the removal and re-install of the new unit.I'm sure this would be a 45 minute or less job for a plumber, but for a novice I suspect it will take a few hours.

Want Home / House Drinking Water Filtration System - Cartridges made in the USA by KX Technologies Discount?