Showing posts with label mini refrigerator. Show all posts
Showing posts with label mini refrigerator. Show all posts

LG LFC25765SB

LG LFC25765SB
  • Ultra-Capacity in 33" Width 25 cu.ft.
  • Smart Cooling System
  • 10 Year Manufacturer's Limited Warranty on Linear Compressor

I have been wanting a fridge with the pull out freezer.We have had this for just over a month now and are VERY happy with it.A lot of storage in the refridgerator area.We have a deep freezer so the smaller freezer on this doesn't affect us.All you hear with this is the ice maker dropping ice and filling back up.Outside of that, which doesn't bother me in the least, is all you hear from this fridge.

Save 15% Off

Water Sentinel WSW-1 Replacement Fridge Filter, 6 Pack

Water Sentinel WSW-1 Replacement Fridge Filter, 6 Pack
  • Replace every 6 months
  • Simply turn the refrigerator water filter 1/4 turn to remove and replace
  • For use in Whirlpool and KitchenAid side-by-side refrigerators with filter access in the base grille
  • Refrigerator water filter retains beneficial fluoride in water while reducing chlorine taste and odor

and I am happy with what I received they work as expected and they are not expensive. Also easy to install what more can I ask for ..... Helmut

Buy Water Sentinel WSW-1 Replacement Fridge Filter, 6 Pack Now



Purchased same item before and will again, it does what it suppose to do , it is good it is good it is good it is good it is good it is good

Read Best Reviews of Water Sentinel WSW-1 Replacement Fridge Filter, 6 Pack Here

It works great and was what I was looking for at a cheap price. I would buy again when needed.

Compatible Water Filter for Everpure H-300+M made in the USA by Omnipure

Compatible Water Filter for Everpure H-300+M made in the USA by Omnipure
  • Everpure Residential and Food Service Replacement Filter by Omnipure
  • A High Quality, Low Cost Alternative to EV9270-81, H-300+M and H300
  • 5 Micron Filtration :: 10,000 gallons @ 1.672GPM
  • Taste Odor Chlorine Reduction Capabilities
  • Environmentally Friendly Alternative to Bottled Water

This is a great feeling and wonderful product. Came quickly, easy to install, the water is clean and clear, we love using our hot / cold water dispenser so having a great inexpensive replacement filter that comes to your door ready to insall and enjoy is fantastic! I even look forward to chaning it again when needed.

Buy Compatible Water Filter for Everpure H-300+M made in the USA by Omnipure Now

Great water filter with half the cost. Well worth it! I used to pay over $80 for each filter that did the same thing as this one. Can't go wrong ordering thie U.S. made water filter.

Read Best Reviews of Compatible Water Filter for Everpure H-300+M made in the USA by Omnipure Here

We ordered a replacement cartridge through amazon. The prices were really good. Unfortunately, we didn't realize there were different types of cartridges for the filter unit. Even tho' we got the wrong cartridge, the vendor, Pavel, was GREAT. They were so helpful and when my boss opted to order from our old vendor (just because we knew we'd get the right one even tho' the price is a lot more) I wanted to give Pavel a thumbs up because they were so pleasant and helpful. We'll order from them the next time we need to replace the cartridge.

Samsung DA29-00003B Compatible Refrigerator Water Filter

Samsung DA29-00003B Compatible Refrigerator Water Filter
  • NSF / ANSI Standard 42 certified
  • Includes free installation date stickers
  • Retains beneficial fluoride in water
  • Reduces chlorine taste and odor
  • For Samsung refrigerators

The replacement water filter for our Samsung refrigerator is better than Samsungs.We have hard water and this filter lasts twice as long and is so much cheeper.We love it.You can,t go wrong with this filter from Radient Marketing.

TX

Buy Samsung DA29-00003B Compatible Refrigerator Water Filter Now

This is a great replacement filter and the price costs much less than from Sears. I would purchase it again.

Avanti 3.1 Cubic Foot Beverage Cooler / Sylish Black Cabinet With Stainess Steel Framed Double-Pane

Avanti 3.1 Cubic Foot Beverage Cooler / Sylish Black Cabinet With Stainess Steel Framed Double-Pane Tempered Glass Door
  • Glass Door Refrigerator
  • 3.1 CU FT
  • adusstableshelving
  • reversibledoor
  • interior LED Lighing

I'm on my second one ordered direct from Amazon.com. The first one would not cool below 50 degrees no matter what I did and usually kept the temp somewhere between 50-60 degrees. On the plus side, returning it was no problem, they even arranged for UPS to pick it up, just keep your box so you can repack it. The second one does a little better. It will keep the temp at 35 degrees if I turn it to run continuously. On 7 (the highest) it will run from 45-50 degrees. It's fairly noisy running all the time, but not as bad as my room a/c. I would return it if I could find a box.

Buy Avanti 3.1 Cubic Foot Beverage Cooler / Sylish Black Cabinet With Stainess Steel Framed Double-Pane Now

I purchased this unit on the web a few months ago and it works great. I bought it for my employees at work and they love it. Its a perfect size and its ADA compliant. Will definitely recommend this unit.

Read Best Reviews of Avanti 3.1 Cubic Foot Beverage Cooler / Sylish Black Cabinet With Stainess Steel Framed Double-Pane Here

I thought we were going to have to send it back but after about 2 weeks we finally got it to stay very cold without freezing the beer. It did take a lot of trial and error.

Want Avanti 3.1 Cubic Foot Beverage Cooler / Sylish Black Cabinet With Stainess Steel Framed Double-Pane Discount?



This was an outstanding refrigerator, while it worked. Kept beverages frosty, wasn't noisy, and looked great.

About one year and two weeks later, I arrived in my office to find my beverages warm and the unit making an intermittent clicking sound. Can't find anybody who will repair it, so this goes in the trash.

Expensive for the length of time that it worked.

Save 31% Off



Looks and works better than expected. Excellent temperature control and the lighting is perfect. It is tastefully designedand many friends have drooled over it.

Butler Freestanding Touchscreen Wine Cooler

Butler Freestanding Touchscreen Wine Cooler
  • Made from glass
  • Black color
  • Holds upto 34 bottles
  • Includes control panel lock
  • 19 in. W x 18.5 in. D x 32.75 in. H (59 lbs.)

I'm a serious collector, with most of my collection off-site at a professional storage facility. My goal was to have something to keep 2-3 cases at home for relative immediate consumption.

This is a perfectly fine cooler to store wine for short term (less than a year). It does not hold the stated 34 bottles of wine unless you have all small bordeaux style bottles. I can fit about 28 burgundy style bottles with ease. It is as quiet/noisy as I'd expect for a compressor model. It maintains it's temperature, and the compressor maintains better humidity than do the thermoelectric models. For what I was looking for, at the price, I'm very satisfied. This is not something to age your wine. It is designed to protect your wine in the SHORT term from common household temperature fluctuation. I recommend it.

Pros: price, attractive, operates with ease.

Cons: a little noisy, poor shelving design, glass is not tinted to protect from light, no lock on door.

Buy Butler Freestanding Touchscreen Wine Cooler Now

This is a pretty nice looking cellar that has a fairly low price

Pros:

1. attractive

2. good temp control

3. good price (can actually be bought more cheaply at costco...sorry amazon)

4. NOT thermoelectric...will probably last longer

Cons:

1. doesn't really hold 34 bottles UNLESS you only have bordeaux/cabernet.doesn't fit pinot noir/chardonnay/burgundy style bottles in the same quantity

2. NOT thermoelectric, so if you're really worried about vibration, there will be some.It should be noted that there isn't really any evidence that vibration alone will cause flaws in your wine, most of this is anecdotal or theoretical.Mine did come with little foam dampers on the edge of each rack, so hopefully that absorbs some of the minimal vibration from the compressor

Read Best Reviews of Butler Freestanding Touchscreen Wine Cooler Here

Bought one, about 30 min ago, and I put it right back in my car.It's going back tomorrow.

I couldn't get 5 cab bottles to fit crossways.Turning shelves over doesn't help because you can't fit bottles in the shelf below if you try.The spacing is so tight that you have no options if you're storing anything but the most narrow bottles.(And even those are jammed in...to the point that they're interfering with bottles on the shelf above.)You can't space things out with 4 bottles because the shelves won't allow it.If you invert the shelves, you have to do it with all of them, and the wire support frame won't let the bottles sit nicely.

Non-cab bottle types means you can fit 3 bottles per shelf.They really took any extra room out, and it's a shame.1/4 inch wider and this thing would be really nice.But it's not.It's a cheap piece of junk.

Want Butler Freestanding Touchscreen Wine Cooler Discount?

We got ours at Costco about 4 months ago since it was a bit cheaper, plus the return policy cannot be beat.

Non-standard bottles will give you an issue, but nothing major, just have to learn where to place them, top or bottom. It will also might not fit all 34 bottles, but it will be somewhere between 25-30.

Noise? Yes, it does make some noise, but nothing disturbing, or at least not any louder than our current fridge. What it gets me, it tends to make difference noises at different times. But nothing that will keep me from sleeping or watching the TV (wine fridge is in kitchen, next door to living room, no door).

We love it and are very happy with the purchase, it works as advertise!

If you are looking for an inexpensive wine fridge, this is it.

Save 45% Off

This unit would work well for individuals with a case or two of wine. It is aesthetically appealing and the temperature controls are well designed, unfortunately it falls short of holding 34 bottles. If you are storing wider based Burgundy bottles you can squeeze about 21 in it. A mixture of slimmer based Bordeaux style bottles with Burgundy bottles can probably hold around 27. If you are expecting it to easily hold 34 bottles, you are likely going to be disappointed.

Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW

Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW
  • Best Cleaning In The Industry Enabled By The PowerWash System
  • PowerWash Cycle
  • PowerSpray Technology
  • Optimal Dispensers
  • 10-Year Limited Parts Warranty On Washer Motor And Basket

Our old agitator died with a spurt of smoke and the smell of burning electrics!So we were off looking for a new machine.Our memory of our past experience with the Maytag Neptune mold incubator left us wary of buying another HE frontloader.We decided to look into HE top loaders, since that is what is mostly available at the retail stores.I read reviews rather extensively on the Internet and took a look at the available YouTube videos.The comments and complaints were simply dreadful.YET, my local retailer said that the Maytag Bravos MVWB705YW was the best model out there.And the model was rated highly by Consumer Reports.So with great fear and trepidation, we purchased it despite the complaints of various noises, breakdowns, poor cleaning, frequent unbalanced loads, leaking, premature end of lifespan, electronics failures, discolorations, scum cakings, moldy smells, and on and on.It simply amazed me that a major corporation could manufacture such a modern appliance that caused so much agony among its users.In the final analysis, most consumers felt that the machine was a waste of money.When I asked him about all this, my brother-in-law said that buying a new HE machine was a "crap-shoot" today.You had a 50-50 chance of getting a lemon.He wished me luck and said to let him know how we made out.So TODAY, the new Maytag Bravos MVWB750YW was delivered and installed; and it underwent its "maiden voyage."The first load consisted of towels.This became unbalanced, and the instruction manual said to let the machine run a "balancing" program.Well, it never stopped.So I powered the machine down, which emptied the tub.Then I restarted the machine on a RINSE/DRAIN/SPIN cycle.This worked fine, and the clothes eventually came out of the dryer with a clean look and fresh smell.The second load consisted of colored clothes; the third load consisted of whites.Both loads ran without incident and the outcome was fine for both.The tub of the machine is very spacious.The machine did not make much noise when it washed.It used a half-capful of HE detergent per load.We did not use fabric softener because people complained that it left scum in the tub.So we added fabric softener sheets to the dryer.After every 30 loads, you must use Affresh tablets on a special clean cycle to eliminate mold, bacteria, and scum.The retailer told me that the machine should last 7 to 10 years under normal use.However, if you have a big family and use the machine several times each day, the lifespan could be cut short.I could tell when I looked at the construction of the machine that it wasn't as robust as the outgoing machine.YET, OVERALL, I am quite pleased so far.We'll see how it goes.The best video on YouTube was the one that explained how HE toploaders work.Please remember to read and follow all the directions for the HE machine; this will give you the best opportunity for success!

Buy Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW Now

I absolutely hate this washer. I've owned it for 18 months now and every time I use it I regret the purchase. Here are some of the reasons I hate it.

1. It uses waaaaay too little water. When I bought it the salesman told me that the machine fills to the top of the clothes plus 1 gallon. That is simply not true. The clothes stick out above the top of the water by 9 inches. The water level is slightly adjustable by the soil level setting but this only changes the level by an inch or two. I have experimented for hours to try to increase the water level the machine is determined to keep the level low probably so that they can get their highest-level energy star rating. Now you may think that it is a good thing for it to use too little water but when you see how harsh it is on your clothes (item 2 below) and how wrinkled the clothes get (item 4 below) you will change your mind.

2. It is extremely harsh on clothes. When I bought it the salesman told me that the machine is more gentle than older style agitator machines. That is completely untrue. This washer pills clothes visibly with every single wash. Brand new towels appear old and worn after a few washes. Here is why it is so harsh. The clothes throughout the load are wet but they are not submerged in water. Only the bottom of the load is submerged in water. The washer tries to pull the clothes up and down into and out of the water at the bottom. It does so by twisting and spinning them, similar to the way clothes are twisted when you wring them out. This is harmful for clothes. When clothes are submerged in water (as in older washers) the water acts as a cushion against rubbing. The water is moved by the agitator and the clothes glide around in it. The higher the water-to-clothes ratio the more gentle it is on the clothes. The lower the water-to-clothes ratio, the more tightly the clothes are packed and the more abrasive the rubbing is. This washer is the most extreme case of a low water-to-clothes ratio because the clothes aren't even submerged at all. They are wet and rubbing hard against one another. To make matters worse the wringing action, which is done very tightly, is very harmful for anything but the sturdiest of fabrics. Imagine taking a wet shirt and twisting it as hard as you can from end to end in a wringing action. This is what clothes endure during each load.

3. There is no way to wash delicates in this washer. For all the reasons mentioned in 2, there is no setting on this washer that is acceptable for delicate clothes. The handwash cycle on this washer is much harsher than the normal cycle was on my old washer. None of my work clothes can tolerate it.

4. Clothes come out incredibly wrinkled, twisted, and knotted. As mentioned in 2, this washer needs to twist and knot items to move them in and out of the water. When the load is done they remain this way. Bras are all knotted together in one giant mess that takes forever to undo. I have to first shake items out to untwist them and then dry them on a higher heat setting than I would otherwise use to get the wrinkling out. Use of the lower-speed spin cycle doesn't really help much because the problem is largely due to the washing portion of the cycle. The high-speed spin cycle only sets the twisting in even harder.

5. There is no way to change washer settings after the load has started. How many times have you started a load and then decided, "oops I'd rather use handwash" or "I'd rather use high-speed spin after all". Well forget about changing your mind on this washer. This washer goes through an extensive calibration cycle at the beginning of each load to figure out how much water to use. The calculations it does during this time are based on the cycle settings such as soil level, load type, etc. It can't let you change settings once the calibration cycle has started because its calculations will get messed up. Maytag says that all you need to do is press cancel and restart but what makes this so incredibly annoying is that cancel drains all the water from the washer. It often happens to me that I want to change settings after the washer is partly full of water plus soap. To make a setting change I have to throw away the entire load of water and soap. You wouldn't believe the amount of water I've wasted because of needing to press cancel.

6. The soak cycle wastes water and soap because once the soak cycle is complete there is no way to continue using the same water to complete a wash. It gives you no option but to drain the entire tub after the soak cycle. Then when you want to wash you have to refill it again and add more soap.

7. The calibration cycle takes a long time. As mentioned in 5, this washer goes through an extensive calibration cycle at the beginning of each load to figure out how much water to use. It takes about 5 minutes and makes the cycle take that much longer with the only benefit that it is deciding on the "optimal" amount of water to use. I would much rather have the level manually selectable and the cycle 5 minutes shorter.

8. The electronic smarts are very limiting and annoying. The salesman told me "this washer is so great that it won't allow you to damage your delicates". What he meant is that the washer limits your options depending on what cycle you have selected. So for example, if you have the washer set to the handwash agitation, it won't let you use high-speed spin or let you use warm water. Or if you use the soak cycle it wont let you use hot water. Or if you use the soak cycle there is no way to get delicate agitation. There is no way to override their setting limits. How ridiculous! I know better than some engineer at Maytag what options are appropriate for me. To think that they advertise this as a feature?!?

9. The lid locks. Sometimes when washing delicates I like to be able to keep the lid open during agitation so that I can assist with special pieces. This washer won't allow any cycle to continue with the lid open although I did find a way to bypass the lid lock function.

There is only one positive thing about this washer. I like the glass lid because it lets me see how harshly the washer is twisting my clothes.

Some reviewers here have commented that maybe I did not properly follow the instructions about how to distribute clothes within the washer. That is not true. I read and follow the instructions perfectly it doesn't help.

The first day after I got this washer I tried to return it but the store wouldn't take it back. I called Maytag and begged them to tell me how to increase the water level. I tried to pay a service person to increase the water level. I kept being told there is absolutely no way to increase the water level.

I am an electrical engineer and I got so frustrated with Maytag that I spent about 8 hours working out a way to make the water level on this washer adjustable. It requires adding a potentiometer (variable resistor) to the control board that is accessible from the top of the washer. The potentiometer adds an offset of water to the level. Right now I have it set to add an extra 10 inches of water so that the clothes are completely but just barely submerged. It makes a huge difference in wear and tear on clothes and makes the handwash cycle usable. The washer is now just barely bearable. If you want to use my technique for adjusting water level, email me at sueonline@gmail.com and I'd be more than happy to share the method with you (for free). I even have pictures showing the control board modification.

UPDATE: During the past 12 months I have recieved about 500 emails from people who purchased this washer and are searching online for how to increase the water level. They come across my review and email me. I hear the same story over and over again from them. They bought this washer and hate it fiercely and want help increasing the water level. I am including below some examples of the email responses I've gotten to my review. I have not edited these emails these are the exact words of others.

"I was so happy to find your review of the Maytag Bravos washer on Amazon.I too have this washer and share the same frustrations.I have missed my "old fashioned" washer since the first wash!My family and I spent the holidays with family out of state who had a machine that actually fills up with water and allows you to manipulate settings.This was the highlight of my vacation...lol!"

"We read your review on the Bravos Maytag washing maching and totally agree. I have had mine about the same amount of time and I am completed frustrated. It just doesn't wash the clothing. If you would be so kind as to send us your fix, we would greatly appreciate it. My husband is a mechanical engineer and will happily rip into it; otherwise, I may just go back to my old machine in the basement."

"I agree with your entire post! I never thought to ask can I soak clothes in this produce? I have tried to soak socks and there was not enough water to cover them. This washer and dryer pair does not work as advertised. Could you please send the water adjustment and computer map."

"Hello,I read your review on amazon.com and would really appreciate your information on how to increase the water level. I bought the machine 5 days ago and completely agree with your review."

"Kudos to you for a comprehensive break-down of frustration of the Maytag BRAVOS!Bravo for nothing this machine is the bane of my existence.It is ruining our clothes and gone are the days when we could simply dry laundry on the line now every last bit has to be 'fluffed' in the dryer to remove the annoying wrinkles!If you would kindly provide the details of how you 'outsmarted' your maching re: water level, that would be great!"

"could you please send me your instructions on how to fix my piece of junk washing machine?... is this something that i could have an electrician fix easily?... thanks so much for your help..."

"Your description of the water level problem is almost word for word my own, ion all its detail. If you can help, I would like to try to make the fix -assuming a simple home workshop kind of guy can do it with your help."

"Thank you so much for your Amazon review of the Bravos....I am not an engineer but I could have written your review! Dear Dumb Engineers at Maytag Who Have Never Apparently Done Laundry In Your Lives: WATER CUSHIONS THE CLOTHES!!!!!! WATER RINSES THE SOAP OFF!!!!! WATER HELPS REMOVE THE DIRT!!!!!! This washer is like taking your clothes to the river and beating them on a rock. My garden hose is outside the laundry room door; I have considered filling the washer myself! I have problems with stains, smells, towels getting "pulls". Delicate? Handwash? Good luck! And why does the "soak" cycle agitate?!!!"

"I saw online your review of the Bravos XL washing macine. We share you critic of this Maytag model. Could you please email us as to how you modified the Maytag to allow a higher water fill level. It would be much appreciated. I would like to modify the Maytag to make it useable. Thanks in advance."

"Thanks for the post on Amazon about the Brovos XL Washer. I'm very frustrated with all the points you laid out. If I could increase the water level that would be a great benefit and maybe I can live with the forced settings."

Read Best Reviews of Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW Here



We used this machine for 6 months, the problem is that it doesn't provide enough water to clean the clothing.Many white items we washed such as polo shirts, table cloths etc, came out with brown stains on them as there wasn't enough water to clean them.We put the cleaner tablet into the machine and even had a Maytag person check it out but it didn't help.We returned the machine and got one that has enough water to clean the clothing.In Maytag's defense they said that all the new HE machines have water limits imposed on them by the Gov, but that was not validated beyond what he said.

Want Maytag 3.6 Cu. Ft. White Top Load Washer - MVWC360AW Discount?

My husband and I purchased this washer after our Kenmore top-loader bit the dust.....never did like it and wasn't sorry to see it go after only five years. We got the best deal on the Maytag Bravos XL and since it's made by Whirlpool and made either in the US or Canada, it made it even more appealing to purchase.

Before it was delivered I got online to read reviews. This was the first site I had hit and after reading the very long-winded review from the engineer I was upset to say the least. Normally, I look at reviews before purchasing anything but this time I didn't and thought I was going to pay the price. I had my husband who is also an engineer read it. In his usual manner he shrugged it off and said, "We'll see."

However, I kept reading other reviews on other sites and some were starting to be positive and claiming that most of the negative reviews came from people who didn't follow directions so I decided to calm down, wait, and decide for myself.

Well, it's been one week and I've washed everything you can imagine, such as towels, sheets, comforter, delicates, jeans, etc. and every one of these loads came out perfect......no twisting of clothes, dry spots, or excessive wrinkling.

I don't have small children or a husband that gets extremely dirty so I can only go by what I'm used to washing but everything has been cleaned thoroughly.

Maybe it's because I'm married to an engineer and I know what they can be like but I've been laughing at the extent this person has gone through to get more water instead of reading the directions and following them. Maybe they just got a lemon...who knows.

At this point, I would highly recommend this product.

Save 13% Off

People, do yourself and your family a favor and DO NOTNOTNOTbuy this machine.Bottom line, it does not get your clothes clean because it does not allow adequate water for ANY CYCLES.I must wash each load, twice to even get close to getting them clean.Also, I discovered that I can only put in about 4 to 6 items MAX per load or they simply will not be adequately saturated (forget being submerged) with water.They don't smell clean even after a complete cycle, right out of the washer.I have gone to work several times only to start smelling a moldy smell on my clothes about 1-2 hours into the day.If I use fabric softener, it only MASKS the odors left in the clothes.I finally decided to use regular and color safe bleach in EVERY load to try to get them truly clean, and remember, each load gets washed TWICE !!!The LARGE CAPACITY is a JOKE because you should never, NEVER, put more than a few items in at a time.This machine DOES NOT save time, water, money or anything.The only positive thing I have to say is that the high speed spin gets a great deal of moisture out of the clothes (not that there was a great deal to begin with) and so the drying time is less.Keep searching people.Do not assume, like I did, that the negative reviews were from competitors or "less than tech savvy" people who simply could not operate modern machinery properly.THIS ONE IS A REAL LEMON.I would give it NO STARS, OR NEGATIVE STARS if I could but this particular site doesn't allow that.

EdgeStar 103 Can and 5 Bottle Extreme Cool Beverage Cooler - Stainless Steel

EdgeStar 103 Can and 5 Bottle Extreme Cool Beverage Cooler - Stainless Steel
  • Approximate temperature range: Mid 30s - Mid 50sºF
  • Incandescent interior lighting displays beer and beverages; Powerful compressor based cooling; Auto defrost
  • Color: Black cabinet with stainless steel trimmed glass door; Freestanding application
  • Interior Dimensions: 28 3/4" H x 15 1/2" W x 14 1/4" D
  • Exterior Dimensions: 33" H x 19" W x 18 1/4" D

Had the 118 can refrig for 1 month.Couldn't handle the whistle from the compressor.Had to pay to send it back.They said they didn't hear a thing.It was returned damaged.Cost me $110 extra for all this and now I have to get rid of it.I have to turn it off in order to speak with my guests.I turn it off when I'm in the room.When I talked with the service people on the phone, they said if they exchanged it I would probably still have the same problem...Don't buy any edgestars

Buy EdgeStar 103 Can and 5 Bottle Extreme Cool Beverage Cooler - Stainless Steel Now

This beverage cooler is NOT SILENT. The compressor was defective. It started making noise not long after I got it but I didn't seem to mind...as time went on the noise got louder and louder. Now, past the 90 day warranty, I have to turn the TV up everytime the refrig goes on thats how loud it is. Dave S. from Customer Service does not stand by it's product given I purchased a DEFECTIVE COMPRESSOR.Same story as first review. I would have to pay $250 to return the refrig. Most appliance repair cost $70 to come look at it. Even thought parts are covered for a year, Edgestar will not send me a new compressor unless a licenced Technician makes an assessment AND Edgestar agrees with it. Then they will send the part to the technition to fix BUT WILL NOT PAY FOR LABOR!....So, you buy a crappy product and you're SOL and they couldn't care less. !!DO NOT BUY EDGESTAR.

Read Best Reviews of EdgeStar 103 Can and 5 Bottle Extreme Cool Beverage Cooler - Stainless Steel Here



you expect this thing to keep things cold like below 60 degrees at least

you won't get what you want, this cooler doesn't keep things COLD had to send it back which cost me a lot!!

Will Never buy another EDGESTAR product or recommend one to anyone

*******WARNING DON'T BUY********

Want EdgeStar 103 Can and 5 Bottle Extreme Cool Beverage Cooler - Stainless Steel Discount?

"ZERO STARS!"I purchased this Edgestar 118 Can Beverage Refrigerator 14 months ago.What a mistake.Don't be fooled by it's good looks, glass door, etc.

It just stopped working.Dead....nothing!Besides that, it was always noisy when it worked.The warranty on this product is only for 90 days.One year on parts.So I called them, and they will not do anything.Even if it was within the one year you would have to send it to them, which will cost quite a bit in shipping costs.I called around to many appliance repair centers and none of them were even interested in looking at it for repair.

I realize that the unit is out of warranty, but shouldn't something that you pay good money for last more than a year??

DO NOT WASTE YOUR MONEY ON THIS!

Like most people...fridge died one month out of warranty and not worth fixing. It never cooled right to begin with.