Showing posts with label whirlpool refrigerator reviews. Show all posts
Showing posts with label whirlpool refrigerator reviews. Show all posts

Sanyo SR-A2480W 2-2/5-Cubic-Foot Compact Mid-Size Refrigerator, White

Sanyo SR-A2480W 2-2/5-Cubic-Foot Compact Mid-Size Refrigerator, White
  • 2-2/5-cubic-foot refrigerator with adjustable thermostat control
  • 2 coated-wire slide-out shelves; half-width freezer compartment
  • Door storage with 2 shelves and a vertical can dispenser
  • Reversible door; smooth back; leveling legs; ice-cube tray included
  • Measures 17-3/4 by 18-5/8 by 24-7/8 inches

My unit came in pretty sturdy packaging. The unit works well and is fairly quiet. No issues. Have not seen any frost accumulate after 6 weeks either.

Buy Sanyo SR-A2480W 2-2/5-Cubic-Foot Compact Mid-Size Refrigerator, White Now

First off, apparently, color makes a difference in the cost. White may be a favorite color for cars, but when it comes to mini-fridges, the stainless-steel look -yes, just the look of it -is the hotter pick. Basically, that means it would have cost me $ more for the shiny metallic one. Because I wanted the cheapest fridge with a recognizable brand name, I went for the white. If it came in puke green and wasbucks cheaper, there'd be a vomit-colored fridge in my office right now. Maybe that would make me eat less and lose weight.

After people found out that I paid $ for this mini-fridge, everyone started saying how Target had one forbucks or how the security guard was trying to give one away the week before. Damn. I reminded myself that this was a brand-new, brand-name Sanyo product.

As for the fridge itself, it works. That's always a plus. But it doesn't hold as much on the inside as the outside would suggest. That's because the bottom level doesn't go back very far. I don't think you could put a gallon-sized jug of milk down there. Besides, to do that, you'd have to remove the second shelf, leaving you nothing to hold your leftover takeout. There's a top shelf next to the super-mini freezer, but it's only wide enough to hold some Uncrustables.

If you're planning to use this as a dorm fridge in a frat house, then you'll be happy to know that with the second shelf in place, you can keep at least 36 cans of beer chilling in here, if you include the slots on the door. The super-mini freezer can hold about six Hot Pockets, and that's it. It comes with a cute little ice-cube tray, but I took that out to make room for, yes, my six ham-n-cheese Hot Pockets.

I have the level of coldness turned up pretty high. I can see the freezer starting to develop those weird ice polyps which I'm pretty sure will grow into the size of melons. Once they merge into a big 'berg, and start encroaching on my peanut-butter-and-jelly sandwiches, I'll lug the fridge outside and let the sun do its thing.

This fridge suits my purposes, but I get the feeling that another one, say, at Target, for $100 and bigger to boot, would probably have fulfilled my needs just the same, if not more. But it wouldn't have been a Sanyo! So I saved $30 on the color, but paid $50 more for the name. Now that's smart shopping.

Read Best Reviews of Sanyo SR-A2480W 2-2/5-Cubic-Foot Compact Mid-Size Refrigerator, White Here



This is a nice little unit.It's been functioning properly and makes very little noise as it runs.

My concern is with the way it is packaged.The packaging does not offer any protection (aside from the cardboard wrapping) against being banged about by package delivery companies.This type of packaging is meant only for bulk freight hauling where pallets of these units are moved around with forklifts.

My unit arrived with a dent near the rear that also knocked loose a support beam.The dent is permanent, but I was able to secure the support beam.Once you open the packaging, it would be very difficult to rewrap in such a way as to return it.So, I'm keeping it because it does work well, and I can't notice the dent by where the unit is placed.

Want Sanyo SR-A2480W 2-2/5-Cubic-Foot Compact Mid-Size Refrigerator, White Discount?



This fridge apparently does not ship well. The top rear corner of my fridge was dented during shipping and the box it came in showed the damage. I thought about returning it but instead decided to avoid the hassle and put it to work immediately. It is a compact fridge. It can't freeze things very well. Do not put a Ben & Jerry's pint in the freezer tray and not expect it to melt or soften. It is quiet and keeps drinks cold. It has removable trays that allow you to customize what kinds of things you keep in it. It is a compact fridge. Do not expect too much of it and you will not be disappointed. I hooked it up to my Kill-A-Watt for a few months and it appears to use about $30/yr of electricity at the "5" (almost coldest) setting.

Well, I got this a few months ago for a much lower price than is currently shown here. I don't know why that is. I relied heavily on these reviews when choosing the fridge, so decided to add mine.

Previously I bought a small refrigerator only to discover it didn't chill food enough to prevent spoiling although the manufacturer claimed otherwise. This one, however, keeps food just as cold as the refrigerator in my kitchen. The tiny freezer section actually freezes -I made ice cubes in a few hours. (Be warned that you can't fit much in the freezer section aside from the ice cube tray that comes with it.)

The refrigerator doesn't leak at all, and fortunately it's not too noisy even though I'm sensitive to noise. I can hear it running, but the noise is low enough to tune out. And there is WAY more space inside than I expected. Overall, this is a very good compact refrigerator, and I hope the price drops again. Because I got a great bargain. Sanyo has a happy new customer.

LG Electronics/Zenith 5221JA2006D VALVE ASSEMBLY, WATER

LG Electronics/Zenith 5221JA2006D VALVE ASSEMBLY, WATER
  • New OEM Original Part
  • Compatible with the following: LSC27950SW, LRSC26925SW, LRSC26925TT, LRSC26923SW, LRSC26923TT, LRSC26915SW, LRSC26915TT, LRSC26912SW, LRSC26912TT, LRSC26940SW, LRSC26940SB, LRSC26940TT, LRSC26940ST, LRSC26941SW, LRSC26941SB, LRSC26941ST, LSC27990TT, LSC26945TT, LSC27926ST, LSC26905TT, LSC27926TT, LSC27926SW, LSC26905SB

Slightly different configuration but everything fit. Electrical connectors were horizontal and original valve were vertical.The Order was shipped quickly.

Buy LG Electronics/Zenith 5221JA2006D VALVE ASSEMBLY, WATER Now

This item was installed in my LG side-by-side refrigiator. I decided to buy and install this item myself after a repairman was called in to install three previous ones. for some strange reason, this item seems to break down after one year of use. buying online have safe me some money. SO FAR, SO GOOD.

Read Best Reviews of LG Electronics/Zenith 5221JA2006D VALVE ASSEMBLY, WATER Here

work out to the box.

It will be nice if they have new lock rings included.

Will tell a friend about this product.Shipping was fast too.

Want LG Electronics/Zenith 5221JA2006D VALVE ASSEMBLY, WATER Discount?

Everything works great now, no leaks.I have ice again. Hurry.Highly recommend.Exact fit.....

It has been Several months now, no complaints.

Just look up the part number and make sure this one is for your refig.

Bought this for parent's after their icemaker broke. This uses a kind of snap in fitting on the hoses with a clip that goes under the plastic lip to lock the hose in.

Good: Everything comes apart pretty easily.

Bad: You better have small fingers because you're going to be reaching back into some tight spaces to unplug/plug in connections.

Ugly: Hope that your water hoses aren't brittle. The pressure from the pump will split old brittle hoses. I had to piece together some newer hose and splice into the old hose about half-way up the run. Everything lower was brittle and wouldn't take the pressure. The other ugly is that this is a uncommon connection standard and replacement hoses will probably not be readily available. I'd advise before starting this to have a set of hoses on hand just in case the originals are brittle.

10" Sediment 5 Micron Filter w/ 1/4"QC Straight Connection

10' Sediment 5 Micron Filter w/ 1/4'QC Straight ConnectionI have a DolFyn water distillation unit. [Model A30D] City tap water entering the water intake valve must be super clean or the electric intake valve will fail and it is very expensive to replace. In addition, unfiltered water entering the boiling chamber means that you have to clean it more often which is a hassle and not inexpensive either.This 5 micron filter by Omnipure filters sediment effectively. I have used my previous one for 2 years before replacing it. I cut the old filter in half to examine the filter material and found that it was uniformy filled with debris from the tap water. [Your tap water source may require more frequent changes] This filter is expremely easy to change. Just push the 1/4" tubing into the filter end and it is water-tight. Just make sure that you cut a bit off the supply andexit tubing each time so that the tubing is smooth where it goes into the filter ends. Also make sure that direction of the water flow is the same as the flow arrow printed on the filter. This filter is a must for anyone owning a distillation unit to avoid costly maintenance. Price was roughly half of what it is at retail locally. Delivery was one day late but considering it was during the Christmas and New Years holiday that is not unreasonable. Very satisfied with this filter and seller.

Watts K-1 Polyethylene Icemaker Kit, 25-Feet

Watts K-1 Polyethylene Icemaker Kit, 25-Feet
  • Complete kit with tubing and saddle valve
  • Durable and long lasting
  • Polyethylene tubing
  • Easy to install for contractors or homeowners

I got this kit to run a water line from my kitchen sink to my refrigerator's ice maker. I am not a plumber, but I do understand the basic concepts of plumbing and have tackled a few small plumbing jobs. The included instructions are not the best if you need to be walked through every little step, but if you have an experience level similar to me you should be able to get through it.

The kit I got had slightly different pieces than what is in the product picture, however it did have everything I needed. The picture shows 2 nuts and some washers to go on the bolts that hold the two pieces of the saddle together. In the kit I received there were no nuts or washers because the nuts are actually welded to the bottom part of the saddle and the bolts just screw directly into them. All other pieces were the same.

According to the instructions the self-tapping saddle valve that comes with this kit can only be used to tap into a supply line that is 3/8" to 1-3/8" plastic or copper so make sure and check the size and material of the line you will tap into if you plan on using this valve. My sink line is mostly the flexible stainless steel, but fortunately there was about a foot of copper pipe between that and the faucet which I was able to tap into. The one problem I had with this kit was with threading the saddle onto the tap-valve. If you look at the product picture it shows the T-valve already has half of the "saddle" on it, but mine came with that saddle part separate. You are suppose to be able to just screw that saddle on the tap-valve (it's already threaded so should not be an issue), however the hole in the saddle was slightly too small. I had to take a pair of vice-grips and and adjustable wrench and man-handle the thing on. After a good bit of elbow grease I was able to finally get it on, though, and after that installing the valve was very easy. After you tighten the saddle around the pipe (and put the included rubber gasket below the T-valve), you simply start turning the T-valve clockwise as far as it will go and there is a spike inside that pierces the supply line. It was so easy that I did not even feel it going into the pipe and actually thought at first it wasn't going down far enough to pierce it. When I turned the valve back the other way, though, water started flowing just like it should.

Then it was just a matter of running the plastic line to my fridge and using the included supplies to connect it. I used plumbers tape on all the threads just as a precaution, but supposedly you do not have to if you don't want to.

I would again caution anyone who wants a clear step-by-step guide from this kit, but I think as long as you have a basic understanding of plumbing you will be OK. I am giving it 4 stars due to the saddle valve issue and since the instructions could be better. For the price, though, I think this is hard to beat.

Buy Watts K-1 Polyethylene Icemaker Kit, 25-Feet Now



The local HD was charging a lot more for this same kit so I came here. This installed without a problem, saddle valve seems like it'll hold up. A common problem I've seen with the valves is they start leaking after they've been used (open/closed) a lot so only time will tell if the 7$ was worth it. It's about the same quality you would find from any kit in the sub 20$ price range. I prefer polyethylene over copper because it's easier to work with needing to move fridge in and away from wall primarily. You also wont have the copper taste with poly likewise I noticed no real plastic or unusual tastes with this. If you wanted to do it right you could probably get a better PEX line, or even go with braided/SS. But, it probably won't pay off I expect this to last the life of the fridge.

Read Best Reviews of Watts K-1 Polyethylene Icemaker Kit, 25-Feet Here



No hesitations if you are needing to connect an ice maker and can use basic tools and read 9th grade English.

Want Watts K-1 Polyethylene Icemaker Kit, 25-Feet Discount?



I used this kit to install a water filter under the sink.While I didnt use all the items I used most of the kit.It is a good price for all that you get



Just as the other reviews say, the directions were not on point, then once we got it hooked up, the problem was the tubing could not take the water pressure running to the fridge even when it was turned down completely low.It kept popping off.Eventually we said for get it and ended up going to Bestbuy and buying the stainless steel product which worked absolutely great.Waste of money for us.The product seems to be made secure except for where the metal attachment and the cords meet.

Whirlpool WTW4950XW 3.6 Cu. Ft. White Top Load Washer - Energy Star

Whirlpool WTW4950XW 3.6 Cu. Ft. White Top Load Washer - Energy Star
  • Spin Speed: 800 RPM / Energy Guide: 128 KWh/yr
  • Water Used Per Cycle: 15 Gal (avg) / Delay Start: N/A
  • EcoBoost For Enhanced Energy Savings On Any Cycle
  • Dimensions (WHD): 27 1/4" X 43" X 26 5/16"

I bought this washer on sale at Lowes, when the washer I planned to buy required an extra $250 pedestal to be functional.I did not read the CR review until afterward.

If I had read the review prior to purchase, I would not have bought this washer.It is CR's third lowest rated top loading washer, scoring only 32 points, compared to a high of 75 points.Its lowest rated area is the most important-washing efficiency. It was one of only four washers awarded a "fair" rating for washing efficiency-no washers rated "poor". (In most other areas it rated very well.)

I went back in before delivery to swap it out.The salesperson convinced me to try it for thirty days, telling me that no matter what CR said, it would get my clothes clean, and I would love it.I don't love it.Consumer Reports was right.

I wanted to like this washer.It is nice looking.The controls are easy to work, and I thought there would be less chance of a problem with a knob rather than the soft push areas that work the controls on most new washers. It is great for water and energy efficiency.

It just does not get the clothes clean.I am washing small loads of my 86 year old mother's soiled pajamas that I really need to get thoroughly clean.I run a soak cycle, which takes about 30 minutes, with detergent, Febreeze, and Clorox.The soak cycle does not include a rinse or spin, so I run that, which takes an additional 15 minutes or so.Then I wash them in one of the regular cycles, including an extra rinse, with detergent, Febreeze, and Tide laundry boosters.

In total, it takes about two hours to wash a load of clothes.You'd think with all that, that they would be clean and fresh smelling.But they aren't.This washer leaves stains that my old agitator style washer got out, and they occasionally still have an unpleasant odor.

I should have trusted Consumer Reports.Lowes is swapping it out for a Maytag that CR rates higher.

If you have lightly soiled clothes, and are sure to follow the directions closely-it works differently than agitator style washers-it may work fine for you.It was not satisfactory for my needs.

Buy Whirlpool WTW4950XW 3.6 Cu. Ft. White Top Load Washer - Energy Star Now

I just returned this washer after 3 days of washing. It is not like your old school agitator machine. It will hold a lot of clothes, but the "agitator" or wash plate action is not enough for the tough dirt and stains. It is quiet and it saves water but it left a lot stains behind. I used a front loader to get a better wash. Does fine for normal clothes not dirty or stained. Saves water and easy to operate.

Read Best Reviews of Whirlpool WTW4950XW 3.6 Cu. Ft. White Top Load Washer - Energy Star Here



I bought this HE washer because it did not have that big agitator in the middle.I was curious if it would clean well or not.I loaded the washer after putting the detergent in.You have to load this washer leaving a whole in the middle (like a donut).I took a pair of shorts outside and rubbed them in the dirt. I would then dust them off. I did this until the dirt would not dust off and I had two spots the size of softballs on them.Ture ground in dirt.I put the shorts on the top of the load.When I opened the lid after the washer had finished the shorts were somewhere in the middle of the load and clean.My kind of results.

Want Whirlpool WTW4950XW 3.6 Cu. Ft. White Top Load Washer - Energy Star Discount?



This is the absolute worst machine I have ever owned.I purchased it because I was tired of my socks and underwear falling on the floor with the front loader and the fact that the musty smell would not go away.I went with this top loader, thinking it was akin to the good old fashioned washers and I wouldn't have computer issues, smells and mold.Well, I was wrong.To begin with, it rips your clothes to shreds, because it does not use enough water.Your underwear soon has holes and the elastic starts to fall off.Forget putting any decent dress clothing in it, as any satin type of fabric ends up in the trash can.Also, your clothes do not come clean.If you have kids, you can wash jeans three times and still there will be caked on dirt.Forget it, if you have a dog and want to wash a dog blanket, even if you soak it first and wash three times, it still won't be clean and it will still smell.Now, as far as the computer issues............OMG!.........what a nightmare!The water levels are not properly detected so half your load comes out totally dry.I've replaced the lid lock sensor, because it will not lock, even though the machine is new and now, I need to replace it again.Honestly, save yourself a ton of aggravation and buy something else, because this is truly the worst washer I have ever owned. I wish I had returned it, but now I have to go to the laundromat, as I can not afford to repair it again because it has a lousy warranty.You should not have to spend $400 in repairs in less than one year of owning a washer.

Save 11% Off

My husband ordered this washer when our old Whirpool one gave out after 15 years.We normally do a lot of research when we are making a big purchase but this time we didn't, since we needed a washer immediately, and we had already had the same model dryer, which works very well.What a mistake that was!I know that the politically correct thing to do these days is to go Green and use less water, but I don't care what technology the new HG washers have, there is no way that an entire 3.6 cu ft. washer,filled "almost" to the top with clothes, can properly clean an entire load with only 2 inches of water! I know that my loads only had that amount of water in them because when load after load came out with stains, I finally paused the washer in the middle of the wash cycle to view the water level.I was rather shocked to see that it was only filled with about 2 inches!Still, I wanted to give this washer a chance before I returned it, so I gave it one final shot when my daughter spilled chocolate milk all over her bed comforter.I even used a pre staining treatment on it (which always worked perfectly for tough stains in my old washer), but when the cycle was finished and I took the comforter out, the stain was still clearly visible.That was the last straw!I am returning this machine for a GE "old fashioned" model that allows enough water to be filled so that my clothes can be cleaned properly.Unfortunately Whirlpool only makes HG energy efficient models now.The other thing that I want to mention is that I DID READ THE INSTRUCTIONS and I used the machine properly.I did NOT fill it to the very top with clothes. I made sure that my clothes did NOT cover the washer head at the bottom, and that they formed a "ring" around it, AND I made sure I used HG detergent.So, saying that people who are complaining that their clothes are coming out dirty because they are not using the washer properly, doesn't fly in my case.I made sure I followed the instructions.The final comment I want to make about this washer (which is still yet another reason it is getting returned), is that my clothes always come out EXTREMELY wrinkled.I can never get the wrinkles out in the dryer, no matter how much I tried.I NEVER had that problem with my old washer.The bottom line is that if dirty, wrinkled clothes don't bother you, then this is the washer for you.