Whirlpool 4389177 Inlet Valve for Refrigerator

• Works with the following models: Whirlpool 53759201, Whirlpool ED25QFXHW02, Whirlpool ED25VFXHW00
• Whirlpool ED25VFXHW01, Whirlpool ED2DHEXWB
• Whirlpool ED5FVGXSS00, Whirlpool ED5FVGXSS01
• Whirlpool ED5FVGXSS02, Whirlpool ED5HVAXVL02
• Genuine replacement part

The seller is not selling Whirlpool 4389177 Inlet Valve, but W10408179: This is the main unit, without the smaller unit (attached). The photo is clearly wrong.

Buy Whirlpool 4389177 Inlet Valve for Refrigerator Now

It is correct that it's not as shown. It's configured a little different and you have to pry off a part from your existing valve. Basically it's an easy swap. Just be patient and make sure your lines are run correctly. I suggest taking a couple of pictures with your phone camera as you remove the old one for easy reference.

Ice makers go bad. Most people I know just live with a broken door dispenser. Not Me! I swapped This part (Which I know my original was not working) and the Kenmore Ice Maker Icemaker W10122502 & 2198597 (which was still working, but the teflon coating on the tray was very worn) and the Whirlpool Refrigerator P.C. Control Board Kit 4389102 (which was not lighting up but might have been working). All three parts bought through Amazon (aftermarket parts, but generic ice is fine with me. jk) cost about the same as the control board on other sites ($115).

About an hour for all three parts swaps (I had done a dry run last week while making sure the parts I was ordering were correct for my fridge) then waited about 2 hours and that all familiar rumble of ice dropping into the empty bin was so loud my cockatiel did a few laps around the kitchen.

Read Best Reviews of Whirlpool 4389177 Inlet Valve for Refrigerator Here

This was the exact part which came out of the refrigerator.

As expected this did the solve the problem of the frozen / cracked valve

Want Whirlpool 4389177 Inlet Valve for Refrigerator Discount?

the part was exactly as described. i had to remove one of the valves and place in the bracket. i think i had to bend the bracket a little bit too. but now my ice machine and water dispenser work!saved me $$$ for a service call and did it my self! oh ive also had this for about a year installed so far no problems what so ever.

I needed this part to repair my refrigerator and wasn't able to find it locally.One store offered to order the part but at a higher cost.Refrigerator is repaired and I saved $$$$!I would recommend this product.